OPERATION NOTES
Weight Plate Selection
1.Use the Weight Selector Pin to select the number of weight plates to exercise.
2.Do not insert weight selector pin while the weight stack or top plate is in elevated position.
3.Be certain the weight Selector Pin is completely inserted.
4.Each Weight Plate weights approximately 10lbs.
5.Please refer to Weight Resistance Chart page.
6.Never use dumbbells or other means to increase the weight resistance. Use only weight plates provided by manufacturer.
7.For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of Weight Plates. Please refer to the Combination Lock set up.
Cable Tension Adjustment
Adjust the tension of the Cable System by moving the position of lower Pulley on the two Double Floating Pulley Brackets.
If the tension is too loose, move the lower pulley up by one hole.
If the tension is too tight, move the lower pulley down by one hole.
Lower Pulley
Front Press and Butterfly Exercises
1.Insert the Butterfly Lock Pin through the holes on Front Press Base and Butterfly to lock the Butterfly in position when doing Front Press exercises.
2.Pull out the Butterfly Lock Pin when doing Butterfly exercises.
©IMPEX INC. | 7 |