Impex WMGG-224 manual See Diagram3

Page 8

STEP 3 (See Diagram3)

A.) Place the Seat (#10) onto the Main Frame (#3). Secure it to the two L-shaped Brackets (#9) with two M8 x ¾” Allen Bolts (#23) and Ø 5/8” Washers (#28). Secure the Seat to the Main Frame with one M8 x 1 ¾” Allen Bolt (#24) and Ø 5/8” Washer (#28).

B.) Place the Backrest Board (#11) onto the Backrest Supports (#5). Secure it with four M8 x 1 ¾” Allen Bolts (#24) and Ø 5/8” Washers (#28).

C.) Attach the Cross Tube (#7) to the Front Vertical Frame (#4). Use a Lock Knob (#16) to secure the Tube at selected hole on the Frame.

D.) Insert the Foam Tube (#8) halfway through the hole on the Front Vertical Frame (#4). Push four Vinyl Foam Rolls (#14) onto the Tubes.

E.) Lubricate the inside of the Foam Grips (#15) with water. Slide the Foam Grips onto the Foam Tube (#8) from both sides.

DIAGRAM 3

7

Image 8
Contents WMGG-224 Table of Contents Before YOU BeginImportant Safety Notice PrecautionsPage Hardware Pack Assembly Instruction Diagram See Diagram3 Page Parts list Impex INC