See Diagram | Impex WM-343 specs

STEP 4 (SEE DIAGRAM 4)

A.) Attach the hole-side of the Backrest Supports (#28) onto both ends of the Pivot on the Main Seat Support (#32). The other side rest against the Backrest Adjustment Bar (#10).

B.) Place the Backrest Board (#33) onto the Backrest Support (#28). Fasten it with four M6 x 1 3/8” Bolts (#31) and ∅ ½” Washers (#30).

C.) Place Seat Cushion (#34) onto the bracket on the Main Seat Support (#32).

Align the holes and fasten the Seat with four M6 x 1 3/8” Bolts (#31) and ∅ ½” Washers (#30).

D.) Insert the Arm Curl Stand (#44) into the opening on the top of the Front Stabilizer (#49). Secure with a Knob Bolt (#41).

E.) Attach the Arm Curl Pad (#35) to the Arm Curl Stand (#44). Secure it with two M8 x 5/8” Bolts (#27) and ∅ ¾” Washers (#37).