Impex SB-662 manual Assembly Instruction, Exploded Diagram

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Exploded Diagram)

A.) Attach each end of the Main Frame (#1) to the Stabilizers. Secure each end with two M10 x ¾” Allen Bolts (#6) and ∅ ¾” Washers (#10).

B.) Attach two L-shaped Brackets (#3) to the holes on the Main Frame. Secure the Brackets with one M10 x 4” Allen Bolt (#7), two Ø ¾” Washers (#10), and one M10 Aircraft Nut (#9). Repeat the same procedure to install other Brackets. Do not tighten the Brackets yet.

C.) Place the Seat Pad (#4) onto the Main Frame. Align the holes to the Brackets. Secure it with six M8 x ¾” Allen Bolts (#) and Ø 5/8” Washers (#11). Securely tighten all Nuts and Bolts previously installed.

EXPLODED DIAGRAM

5