Assembly Instruction

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.)	Connect the Left & Right Upright Beams (#1 & #2) by a Cross Brace (#4) in the mid-
	span. Align the holes and secure each end with two M10 x 4 ¾” Carriage Bolts (#33),
	one 5 ½” x 1 ¾” Bent Bracket (#13), two ∅ ¾” Washers (#42), and two M10 Aircraft
	Nuts (#45).
B.)	Insert two Crutches (#6) into the top openings on the Upright Beams. Secure them with
	two Lock Knobs (#26) through selected holes to obtain desired height of the Supports.
C.)	Place the Backrest Adjustment Bar (#5) onto the selected slot on Upright Beams.
D.)	Attach the Weight Post (#11) to each Upright Beam. Secure it with one M10 x 1” Allen
	Bolt (#36) and ∅ ¾” Washer (#42). Attach one Olympic Sleeve (#25) to each Post.
	Attach a Spring Clip (#22) to each Sleeve.