Assembly Instruction

Tools Required Assembling the Machine: One Adjustable Wrench

NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury.

STEP 1 (See Exploded Diagram)

A.) Connect the Left and Right Upright Beams (#1 & #2) with a Dumbbell Rack (#3). Secure each end with a M10 x 2 1/8” Carriage Bolt (#7), Ø ¾” Washer (#8), and M10 Aircraft Nut (#9). Do not tighten the Nuts and Bolts yet.

B.) Repeat the above procedure A to install all other Dumbbell Racks.

C.) Securely tighten all the Nuts and Bolts.

EXPLODED DIAGRAM