Impex IGS-02 manual Diagram

Page 6

STEP 2 (See Diagram 2)

A.) Attach two Axle Spacers (#25) to the pivot on the rear of the Calf Raise Frame

(#4). Insert the Axle (#24) through the pivot and then attach the pivot to the bracket on the Seat Support (#18). Secure it with two M10 x 1” Allen Bolts (#11) and 1 3/8” Washers (#19).

B.) Attach the Calf Raise Bar Holder (#28) to the bracket on the side of Main Frame (#33). Secure it with one M10 x 2” Allen Bolt (#37), two ¾” Washers (#5), and one M10 Aircraft Nut (#30).

C.) Attach the Olympic Sleeve (#2) to the weight post on the Calf Raise Frame (#4). Secure it with one M8 x ½” Allen Screw (#3). Attach the Spring Clip (#1) to the Olympic Sleeve.

DIAGRAM 2

5

Image 6
Contents Calf Raise Bench Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Page Assembly Instruction Diagram Diagram Exploded Diagram Parts List Iron Grip Sport