ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: One Adjustable Wrench and Allen Wrench
NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left Stabilizer (#3) to the Left Upright Beam (#1). Secure the side with two M10 x 3 ½” Allen Bolts (#13), four ∅ ¾” Washers (#9), and two M10 Aircraft Nuts (#14). Secure the Bottom with one M10 x 5/8” Allen Bolt (#10) and Ø ¾” Washer (#9). Do NOT tighten all the Nuts and Bolts yet.
B.) Repeat the above procedure A to Connect the Right Stabilizer (#4) to the Right Upright Beam (#2).
DIAGRAM 1
5