ASSEMBLY INSTRUCTION
Tools Required to Assemble the Machine: Two Adjustable Wrenches
NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left Upright Beam (#3) to the Stabilizer (#1). Secure it with a Bracket (#7), four M10 x 3 ¼” Carriage Bolts (#10), ∅ ¾” Washers (#12), and M10 Aircraft Nuts (#13).
B.) Repeat the above procedure A to Connect the Right Upright Beam (#2) to the Stabilizer (#1).
DIAGRAM 1
4