STEP 7 (See Diagram 7)
A.) Attach the Leg Developer (#4) to the bracket on the top of Main Seat Support (#1). Secure it with one Axle (#16), two M10x ¾” Allen Bolts (#43), and ؾ” Washers (#48).
B.) Insert one Foam Roll Tube (#15) halfway through the hole on the Main Seat Support. Insert two Foam Roll Tubes halfway through the holes on the Leg Developer. Push six Foam Rolls (#18) onto the Tubes from both ends. Plug six Foam Roll End Caps (#31) into the Ends.
C.) Attach the Arm Curl Pad (#27) to the Arm Curl Stand (#9). Secure it with two M8 x 5/8” Allen Bolts (#52) and Ø 5/8” Washers (#49).
D.) Insert the Arm Curl Stand into the top opening on the Main Seat Support. Use a M12 Lock Knob (#36) to hold the Arm Curl Stand in desired position.
E.) Attach the Bar Holder (#57) to the Leg Developer and secure it with a
F.) Attach an Olympic Sleeve (#56) to the weight post on the Leg Developer. Attach a Spring Clip (#19) to the Sleeve.
DIAGRAM 7
12