Impex IGS-663 manual Assembly Instruction, Exploded Diagram

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Exploded Diagram)

A.) Attach the Main Frame (#1) to the Stabilizer (#2). Secure it with two M10 x 2 1/8” Allen Bolts (#10), two ∅ ¾” Washers (#13), and one Bracket (#3).

B.) Attach two L-shaped Brackets (#4) to the holes on the Main Frame. Secure the Brackets with one M10 x 4” Allen Bolt (#11), two Ø ¾” Washers (#13), and one M10 Aircraft Nut (#15). Repeat the same procedure to install the other two Brackets. Do not tighten the Brackets yet.

C.) Place the Seat Pad (#6) onto the Main Frame. Align the holes to the Brackets. Secure it with four M8 x ¾” Allen Bolts (#12) and Ø 5/8” Washers (#14). Securely tighten all Nuts and Bolts previously installed.

D.) Insert the Foam Tube (#5) halfway through the hole on the Main Frame. Push two Foam Rolls (#7) onto the Tube. Plug two Foam Roll End Caps (#8) to the Ends.

EXPLODED DIAGRAM

5