Impex IGS-07 manual See Diagram

Page 6

STEP 2 (See Diagram 2)

A.) Align the rear of Upper Frame (#8) to the Rear Vertical Beam (#19). Attach the Top Socket Assembly (#14) to the joint. Secure it with four M12 x 3 1/8” Carriage Bolts (#11), 1” Washers (#12), and M12 Aircraft Nuts (#13). Do not tighten the bolts yet.

B.) Place the Upper Frame onto the open bracket on the Front Vertical Beam (#22). Secure it with one M10 x 3” Allen Bolt (#44), two ¾” Washers (#43), and one M10 Aircraft Nut (#5). Securely tighten all bolts previously installed.

C.) Attach the Foot Plate Support (#40) to the Base Frame (#45). Secure it with two M12 x 1” Allen Bolts (#29) and 1” Washers (#12).

D.) Attach the Foot Plate (#41) to the Foot Plate Support (#40). Secure it four M10 x 1” Allen Bolts (#42), ¾” Washers (#43), and M10 Aircraft Nuts (#5).

5

Image 6
Contents IGS-07 Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Page Assembly Instruction See Diagram See Diagram Diagram See Cable Loop & Diagram Cable Loop Diagram Diagram Page Parts List ’tyIron Grip Sport Info@impex-fitness.com