Robic SC-587 operating instructions S4S1

(D) CHANGING MODES

S4S1

S3S2

S5

Press S3 to change modes. The sequence is as follows:

S3

NORMAL TIME	S2
	DUAL TIME
S3	Press and hold
ALARM	2-3 seconds

S3

SPORT TIMER

S3

CHRONOGRAPH

(E) HOW TO SET NORMAL TIME AND DUAL TIME

S4S1

S3

S2

S5

-Press S3 to show Normal Time mode (T1) or Dual Time mode (T2). “TIME” will be displayed for 1 second.

-Press and hold S2 for 2-3 seconds to select Normal Time mode or Dual Time mode.

-Press and hold S4 for 3-4 seconds to enter the setting mode. The second digits start flashing.

-With each press of S1, the selected digits, weekday or 12H/24H, can be adjusted. They will appear flashing. Press and hold S1 for rapid digit advance.

-Press S3 again. Next digits, weekday or 12H/24H functions can be selected for setting. The sequence is as follows :

SECOND	S3	S3	S3
	HOUR	MINUTE	YEAR
S3			S3
	S3	S3	S3
12H/24H
	WEEKDAY	DAY	MONTH

-When setting seconds, pressing S1 while the second digits count between 30 to 59 will reset the second digits to 00 and 1 will be added to the minute digiits.

-Year can be set from 1990 to 2089.

-When setting 12H/24H, press S1 to select either 12-hour or 24-hour display formats. If 24-hour display format is selected, there will be no PM flag “P”.

-After all adjustments are completed, press S4 to exit the setting mode.

Notes:

1.Normal Time mode (T1) and Dual Time mode (T2) count up individually with the same second.

2.When Normal Time mode (T1) is displayed, press and hold S2 for less than 2 seconds to view the dual time without changing the mode.

The enclosed design is			proprietary intellectual	property owned by
National	Electronics	&	Watch Co., Ltd. and it may NOT be used,
copied or distributed except with authorization				in writing from	2
National	Electronics	& Watch Co., Ltd.