Using the Stopwatch Timer, Care | Radio Shack 63-5103 specification

At the preset alarm time, the watch announces the time. For example, if you set alarm 1 to sound at 10:35 AM, the watch repeatedly an- nounces “Alarm 1. Good morning. It is 10:35 AM,” then repeatedly sounds a series of four beeps for about 1 minute. To silence the alarm sooner, press any key.

To turn off the alarm so it does not sound, repeatedly press MODE until the desired alarm setting appears, then repeatedly press ADJ until the watch repeatedly announces “alarm” and the selected alarm number “off,” and disappears.

Turning the Hourly Time Announcement On and Off

You can set the watch so it announces the time on the hour. When the watch displays the current time, press ADJ. The watch announces

“hourly report on,” and appears. To turn off the hourly report, press ADJ again. The watch announces “hourly report off,” and disap- pears.

Note: The hourly time announcement sounds at the beginning of each hour between 6:00 AM and 10:00 PM.

USING THE STOPWATCH TIMER

The stopwatch counts elapsed time up to 23 hours, 59 minutes and 59 seconds. When the timer reaches 23:59 59, it resets to 0:00 00 and begins counting up again.

Follow these steps to operate the stopwatch.

1.Repeatedly press MODE until the watch announces “stopwatch.” ST and 0:00 00 (the stopwatch) appear.

Notes:

•If 0:00 00 does not appear and : does not flash, the timer is not running. Press DATE/SET to reset the stopwatch to 0:00 00.

•To reset the stopwatch to 0:00 00, press ADJ then DATE/SET while the timer is running. The watch announces “all clear” and the timer changes to 0:00 00.

2.Press ADJ to start the stopwatch timer. The stopwatch starts and announces timing and the display shows the advancing time.

3.Press ADJ. The stopwatch timer stops and the display freezes.

4.To restart the stopwatch timer, press ADJ. The stopwatch timer continues from the elapsed time in Step 3.

5.Press ADJ to stop the timer, then press DATE/SET to reset it to 0:00 00. The watch announces "all clear."

Note: While the stopwatch is running, you can press MODE to use the watch’s other features.

RECORDING LAP TIMES

The watch’s lap function lets you freeze the display, document the timed reading, then return to the stopwatch timer to see the advancing time. You can monitor lap times continuously as long as the stopwatch continues to run.

Follow these steps to measure lap times.

1.Repeatedly press MODE until the watch announces "stopwatch". The stopwatch display and ST appear.

Note: If : is flashing, press ADJ then press DATE/SET twice to reset the stopwatch to 0:00 00.

2.Press ADJ to start the stopwatch timer.

3.When the first lap is finished, press DATE/SET. The stopwatch dis- play freezes, but the stopwatch timer continues to run. The : in the elapsed time flashes.

4.When you have documented the lap time, press DATE/SET. The display changes to show the advancing time on the stopwatch timer.

5.Repeat Steps 3 and 4 for each additional lap.

6.Press ADJ to stop the stopwatch. Then press DATE/SET to reset the display to 0:00 00.

The stopwatch timer announces the elapsed time according to this ta- ble.

Elapsed Time	Announcement


1 to 10 seconds	Each second

11 seconds to 1 minute	Every 10 seconds

1 to 10 minutes	Every minute

10 minutes to 24 hours	Every 10 minutes

For example, the stopwatch announces “5 minutes” if 0:05 00 ap- pears.

You also can press TIME to hear the voice announcement at any time while the stopwatch is running.

CARE

Keep the watch dry; if it gets wet, wipe it dry immediately. Use and store the watch only in normal temperature environments. Handle the watch carefully; do not drop it. Keep the watch away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the watch’s internal components can cause a malfunction and invalidate its warranty. If your watch is not performing as it should, take it to your local RadioShack store for as- sistance.

REPLACING THE BATTERY

Your watch comes with one CR2025 lithium battery installed for pow- er. When the display dims or the watch stops operating properly, re- place the battery.

Note: The screws are small and can be easily misplaced. Be sure you note where you place them. Also, the metal clip is difficult to remove and easy to bend when re-installing. If you are unsure whether you can do this, we recommend that you take the watch to your local Ra- dioShack store to have the battery replaced.

63-5103 specifications

Radio Shack, a name synonymous with electronics and technology, produced a multitude of innovative products over the years. Among these is the Radio Shack 63-5103, a versatile and popular model well-regarded in various circles for its distinctive features and user-friendly design.

The Radio Shack 63-5103 primarily functions as a multimeter, an essential tool for anyone working in electronics. This device allows users to measure voltage, current, and resistance, making it invaluable for diagnosing and troubleshooting electrical circuits. Equipped with a clear digital display, the 63-5103 ensures that readings are easy to read and interpret, a significant advantage for both novice and experienced technicians alike.

One of the standout features of the 63-5103 is its ability to measure both AC and DC voltage, providing flexibility for a range of applications. Users can easily switch between different measurement modes, allowing for quick adjustments based on specific requirements. This multi-functionality streamlines the troubleshooting process, saving time and effort during repairs.

The design of the Radio Shack 63-5103 emphasizes portability and ease of use. With a compact and lightweight structure, it is easy to carry and store, making it an excellent choice for fieldwork or personal use. Additionally, the intuitive layout of the controls ensures that even beginners can quickly familiarize themselves with the device.

In terms of technology, the 63-5103 incorporates an auto-ranging feature that intelligently detects the correct measurement scale, minimizing user error and enhancing accuracy. This is particularly beneficial for tasks that involve varying levels of voltage or resistance, where manually setting the scale can lead to complications.

Another defining characteristic of the 63-5103 is its robust build quality. Designed to withstand the rigors of practical use, the housing is durable, ensuring that the device can endure drops and bumps often encountered in workshop or outdoor environments.

Battery life is also an essential factor for users on the go, and the Radio Shack 63-5103 is built with this in mind. It typically operates for extended periods on a single set of batteries, minimizing the hassle of frequent replacements.

In conclusion, the Radio Shack 63-5103 stands out as a reliable and efficient multimeter that caters to a broad audience. With its combination of functionality, portability, and user-friendly features, it remains an excellent choice for anyone looking to delve into the world of electronics, whether for professional or personal projects.