Features, Control Buttons, Display Modes

NOMAD

Model FS81202

Model FS81203

Model FS81204

FEATURES:

•30 meters H2O

•Day/date/calendar

•Compass with degrees and direction

•Barometer with pressure trend

•Altimeter with cumulative ascent and descent

•99 lap memory chronograph

•Countdown timer

•5 Alarms

•EL backlight

CONTROL BUTTONS

S1 – Start/split Button

S2 – Stop/reset Button

S3 – Mode Button

S4 – Light/adjust Button

S3S2

DISPLAY MODES

The watch has eight display modes:

TIME, COMPASS (COMP), ALTIMETER (ALTI), BAROMETER (BARO),

CHRONOGRAPH (CHRO), TIMER, ALARM and TEMPERATURE (TEMP).

To change from one display mode to another, press S3 button once. The mode description will appear for around 2 seconds before the selected mode is activated.

TO USE THE BACKLIGHT

Press S4 button to turn on the backlight for 3-5 seconds.

OTHERS

In any setting/viewing mode, if there is no key manipulation for around 1- 2 minutes, the watch will automatically

save the entered data and exit the setting/viewing mode.

TO SET THE TIME AND

CALENDAR

1.Press S3 button to select TIME mode.

2.Press S4 button for around 3 seconds.The message “Set-Time” will be displayed.

3.Press S3 button once, the hour digits will blink.

4.Press S1/S2 button to set the hour digits. Holding down the button will speed up the process.

5.Press S3 button once, the minute digits will blink.

6.Press S1/S2 button to set the minute digits.

7.Follow the same pattern to set the second, year, month, date and hour format.

8.To set the second digits, press S1/S2 button to reset the second digits to 00.

9.To set the hour format, press S1/S2 button to toggle between 12-hour and 24-hour format. The P.M. indicator may be displayed to indicate the time period 12:00 A.M.

–11:59 P.M. in 12-hour format. 10.After finish making all the settings,

press S4 button to confirm.

TO SET NIGHT, CHIME AND BEEP

1.In TIME mode, press S4 button for around 3 seconds. The message “Set-Time” will be displayed.

2.Press S1/S2 button to select option mode. The message “OPTION” will be displayed.

3.Press S3 button continuously to select among NIGHT, CHIME or BEEP mode.

4.Press S1/S2 button to activate or deactivate each mode.

5.After finish making all the settings, press S4 button to confirm.

NOTE: When NIGHT mode is activated,

the NIGHT mode icon will appear. The backlight will turn on for 3-5 seconds when any button is pressed. NIGHT mode will turn off automatically after 8 hours.

TO SHOW DUALTIME (T1 OR T2)

1.In TIME mode, press and hold S2 button to view T1 or T2 time zone.

2.Press and hold S2 button for around 4 seconds to swich to display T1 or T2 time zone.

3.Follow the same pattern to toggle between displaying T1 and T2 time zones.

TO SHOW CALENDAR OR TEMPERATURE

1.In TIME mode, press and hold S1 button to view calendar or

temperature.

2.Press and hold S1 button for 4 seconds to switch to display calendar or temperature.

3.Follow the same pattern to toggle between temperature and calendar displays.

TO USE THE COMPASS

1.Press S3 button to select COMPASS mode. The direction, degree and time will be displayed.

NOTE: In COMPASS mode, if there is no key manipulation for around 30 seconds, the compass sensor will be deactivated for power saving. Press S1/S2/S4 button to re-activate the compass sensor. If the compass sensor is deactivated for around 10 minutes, the watch will automatically return to TIME mode.

NOTE: This moving dot represents the direction of North (N).

TO TAKE A NEW “MARK ANGLE”

In COMPASS mode, press S1 button to take a “mark angle”. A new mark will blink to indicate the marked direction and a new “mark angle” (in degree) will be displayed.

1.Press S1 button to take another “mark angle”.

2.Press S2 button to return to COMPASS mode.

TO SHOW THE LAST “MARK ANGLE” OR TIME

1.In COMPASS mode, press S2 button to display to display the previous “mark angle”. A mark will blink to indicate the previously marked direction and the previous “mark angle” (in degree) will be displayed.

2.Press S2 button again to return to COMPASS mode.

TO CALIBRATE THE COMPASS

1.In COMPASS mode, press and hold S4 for around 3 seconds. The message “CALIB” will be displayed.

2.Press S3 button to start the calibration.

3.When the message “2-TURN” is displayed, a series of moving dots will be displayed at the rim of the display and increase in clockwise direction. Rotate the watch horizontally in counter-clockwise

direction in order to freeze the last moving blinking dot to stay at 12- hour position.

4.When the watch is rotated completely for 360 degrees, the message “1-TURN” will be displayed. Rotate the watch again in counter-clockwise direction.

5.To interrupt and stop the calibration, press S4 button. The message “DISTORT” will be displayed and the watch will return to COMPASS mode after 3 seconds.

6.When the calibration is done, the message “DONE” will be displayed and the watch will return to COMPASS mode after 2 seconds.

TO SET THE DECLINATION ANGLE

1.In COMPASS mode, press and hold S4 button for around 3 seconds. The message “CALIB” will be displayed.

2.Press S1/S2 button to select declination angle setting mode. The message “DECLIN” will be displayed.

3.Press S3 button, E will blink.

4.Press S1/S2 button to toggle between E (East) & W (West).

5.Press S3 button. The declination angle will blink.

6.Press S1/S2 to set the degree from 0˚ to 90˚.

7.After finish making all the settings, press S4 button to return to COMPASS mode.

TO USE THE ALTIMETER

1.Press S3 button to select ALTIMETER mode.

2.The latest altitude will be displayed in numeric and graphic formats.

TO SET UP THE ALTIMETER

1.In ALTIMETER mode, press and hold S4 button for around 1 second. The message “SET-ALTI” will be displayed.

2.Press S1/S2 button to select among altitude setting mode (SET-ALTI), sea level pressure setting mode (SEA-Lv) or units setting mode (UNITS).

3.Press S3 button once to enter into each setting mode. Press S3 button again to return to the mode selection screen.

4.In altitude setting mode, press S1/S2 button to set the altitude digits.

5.In sea level pressure setting mode, press S1/S2 button to set the sea level pressure digits.

6.In units setting mode, press S1/S2 button to toggle between M (meter) and Ft (feet).

7.After finish making all the settings, press S4 button to return to ALTIMETER mode.

TO SHOW THE LOG DATE AND TIME

1.In ALTIMETER mode, press S2 button to display log date and time.

2.Press S3 button or leave the watch idle for 5 seconds to return to ALTIMETER mode.

TO CLEAR THE DATA

1.In ALTIMETER mode, press and hold S2 button for around 3 seconds to clear all statistic data and graphic data.

NOTE: After clearing the data, the first new data will be updated after 2 seconds and another data will be taken in every 30 minutes.

TO VIEW ALTITUDE AND OTHER INFORMATION

1.In ALTIMETER mode, press S1 button to select displaying the data of accumulative ascent (ASCENT), accumulative descent (DESCENT), difference in altitude (DIFFER), rate (RATE) or time (TIME).

2.After showing the individual data at the bottom for around 2 seconds, the data in bar chart (graphic) format will be displayed at the top.

NOTE: To reset the difference in altitude to zero, press and hold S1 button for around 3 seconds when the difference in altitude data is displayed.

TO VIEW DATA IN DETAIL

1.In ALTIMETER mode, press S4 button once. The message “VIEW DATA” will be displayed.

2.After 3 seconds or by pressing S1/S2 button, the message “Highest” will be displayed.

3.Press S1 button to select displaying the data of highest altitude (Highest), lowest altitude (Lowest), accumulative ascent (ASCENT), accumulative descent (DESCENT), difference in altitude (DIFFER) or the individual statistic and graphic data recorded. Press S2 button to cycle the selection backward.

4.When displaying highest altitude, lowest altitude and the individual statistic and graphic data recorded, the corresponding log time and date will be swapping in every 2 seconds.

5.Press S3/S4 button or leave the watch idle for 1 minute to return to ALTIMETER mode.

TO USE THE BAROMETER

1.Press S3 button to select BAROMETER mode.

2.The latest sea level pressure will be displayed in numeric and graphic formats.

TO SET UP THE BAROMETER

1.In BAROMETER mode, press and hold S4 button. The message “Sea -Lv” will be displayed.

2.Press S1/S2 button to select among sea level pressure setting mode (Sea-Lv) or units setting mode (UNITS).

3.Press S3 button once to enter into each setting mode. Press S3 button again to return to the mode selection screen.

4.In sea level pressure setting mode, press S1/S2 button to set the sea level pressure digits.

5.In units setting mode, press S1/S2 button to toggle between blinking mbar (millibar) and inHg (inch of Mercury).

6.After finish making all the settings, press S4 button to return to BAROMETER mode.

TO SHOW THE LOG DATE AND TIME

1.In BAROMETER mode, press S2 button to display log date and time.

2.Press S3 button or leave the watch idle for around 5 seconds to return to BAROMETER mode.

TO CLEAR THE DATA

1.In BAROMETER mode, press and hold S2 button for around 3 seconds to clear all statistic data and graphic data.

NOTE: After clearing the data, the first new data will be updated after 2 seconds and another data will be taken in every hour.

TO VIEW BAROMETER AND OTHER INFORMATION

1.In BAROMETER mode, press S1 button to select displaying the data of sea level pressure (SEA-Lv), sea level pressure change per hour (dP/dt) or time (TIME).

2.Press S1 button continuously to view data of Sea level pressure, dP/dt (sea level pressure change per hour) and Time.

3.After showing the individual data at the bottom for around 2 seconds, the data in trend (graphic) format will be displayed at the top.

TO VIEW DATA IN DETAIL

1.In BAROMETER mode, press S4 button once. The message “VIEW DATA” will be displayed.

2.After around 2 seconds or by pressing S1/S2 button, the message “MAX” will be displayed.

3.Press S1 button to select displaying the data of maximum absolute pressure (MAX), minimum absolute pressure (MIN) or the statistic and