JVC MX-J30 manual Using the Timers, Using Daily Timer

Using the Timers

Continued

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

3 Set the on-time you want the unit PRESET

to turn on.

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then

	press SET.	SET
	“OFF TIME” appears for 2 seconds, then
	the unit enters off-time setting mode.
4		PRESET
	Set the off-time you want the unit

to turn off (on standby).

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then

on-time comes (the indicator flashes just before the on-

press SET.

SET

time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press TIMER/CLOCK repeatedly and start from step 1 again.)

On the unit ONLY:

1	Press TIMER/CLOCK until	TIMER
		/CLOCK

“DAILY” appears on the display.

DAILY

The DAILY indicator also starts flashing on the display.

•Each time you press the button, the timer setting mode changes as follows:

DAILY ON TIME REC

Canceled	Clock	ON TIME
	setting

(See page 9.)

2 Press TIMER/CLOCK again.		/CLOCK
		TIMER
“ON TIME” appears for 2 seconds, then the unit
enters on-time setting mode.
	DAILY

DAILY

The unit enters source selecting mode.

DAILY

PRESET

5 Press 4or ¢to select the source to play, then press SET.

•Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

SET

AUX TAPE – CD – – –

TUNER FM: tunes into a specified preset FM station. =go to step 6.

TUNER AM: tunes into a specified preset AM station. = go to step 6.

–CD – – –: plays a disc from a specified track of a specified disc. =go to step 6.

•Make sure there is a CD on the selected disc number tray.

TAPE: plays a tape in deck A or B. =go to step 7.

•Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•Make sure that the tape direction is correct. AUX: plays an external source.=go to step 7.

•To use this setting, the external component has to be equipped with the timer function.

– 18 –

EN16-22.MX-J30[J]/5 18 99.1.28, 5:31 PM