JVC KD-S737R, KD-SX838R Using RDS functions in the FM band, RDS Radio Data System, RDS button

Page 9

Using RDS functions in the FM band

RDS (Radio Data System)

ENGLISH

RDS button

TP/RDS

To select Network-Tracking mode, press the RDS button for more than 1 second.

Mode 1 (AF (Alternative Frequencies): on/REG: off): Network-Tracking is activated.

Switches between stations belonging to the network being received.

Note:

In Mode 1, the broadcast may switch between different programmes even within the same network at certain times.

Mode 2 (AF: on/REG: on):

Network-Tracking is activated and Regional mode is engaged (switches between stations broadcasting the same programme, at all times).

Mode 3 (AF: off/REG: off): Network-Tracking is deactivated.

Network-Tracking reception

When driving in an area where the signal strength drops, the tuner automatically uses PI (Programme Identification) and AF codes to retune to the same programme with a stronger signal from another RDS station in the network. By utilizing these codes, you can continue to listen to the same programme in its finest condition, no matter where you drive. (See illustration.)

When the RDS station to which you are tuned does not provide AF data or the unit is unable to receive AF data for any reason, Network-Tracking reception will NOT operate even when the signal strength drops below the reference level.

The same programme can be received on different frequencies.

Programme 1 broadcasting on frequency E

Programme 1 broadcasting on frequency A

Programme 1 broadcasting on frequency B

Programme 1 broadcasting on frequency C

Programme 1 broadcasting on frequency D

9

Image 9
Contents Instructions KD-SX838R/S737R/S707RPosition And Reproduction Labels PrecautionsContents Adjust the sound as you want see pages 20 Turn on the powerTo drop the volume in a moment To turn off the powerListening to the radio Radio OperationsSelect the band FM1, FM2, FM3 or AM Start searching a stationFM station automatic preset SSM Storing stations in memoryPress and hold both buttons for more than 3 seconds Tune into a station of 88.3 MHz Manual presetPress and hold the button for more than SecondTuning into a preset station Select the number 1 6 for the preset station you wantSelect the band FM1, FM2, FM3 or AM you want Mode 2 AF on/REG on Using RDS functions in the FM bandRDS Radio Data System RDS buttonPTY standby mode Press the SEL button to return to the previous modePress the SEL button for more than 2 seconds Press the + or button to select one PTYs. See the table onSetting and operating PTY standby mode Setting and operating TA Traffic Announcement standby modeTP Traffic Programme button Select the PTY Srch mode with Ting mode seePress the SEL button for more than Seconds to enter the preferred setPTY search operation PTY station search starts after 5 secondsDescriptions of the PTY Codes PTY codesOther RDS functions Traffic information volume controlEON Enhanced Other Networks Number buttonsWhen an FM stereo broadcast is hard to receive Display ModeOther convenient tuner functions Selecting FM reception soundPlaying a CD CD OperationsInsert a disc into the loading slot To stop play and eject the CDTo fast forward or reverse the track Locating a track or a particular portion on a CDTo go to the next track or the previous track To go to a particular track directlyOther convenient CD functions Selecting CD playback modesProhibiting CD ejection To play back tracks at random Random PlaySound Adjustments Selecting preset sound modesIndication For Preset values Select the item you want to adjust Adjusting the soundAdjust the level Indication To do RangePress and hold Sound until the sound mode Repeat the same procedure to store other settingsTo reset to the factory settings Other Main Functions Setting the clockTo check the current clock time changing the display mode Set the minute Select Clock M 2. Adjust the minuteStoring your own mode settings Preferred setting mode controlSelect each Set the de Mode Sired mode Selecting the level display only for KD-SX838R/S737R Turning on/off the key-touch toneSelect Beep if not shown on the display This function is only for KD-SX838RHow to attach the control panel How to detach the control panelDetaching the control panel Unlock the control panelUsing the remote controller Installing the batteriesRemote Operations This section is only for KD-SX838RCD Changer Operations Playing CDsAll tracks of all discs are played back To go to a particular disc directly Mode RND Indicator Plays at random CanceledMode RPT Indicator Plays repeatedly Selecting CD playback modes EnglishHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingSP Ecifications EN, GE, FR, NL 1297MNMUIAJES