4.Press and hold 
to delete the number.
5.Press Center Select Key 
for [SAVE]. A confirmation message appears.
NOTE
If you try to delete the default number, an error message will appear.
Deleting a Contact Entry
1.Press Right Soft Key 
[Contacts].
2.Press Navigation Key 
up or down to highlight the Contact entry to be deleted.
3.Press Right Soft Key 
[Options].
4.Press 
Erase.
5.Press Navigation Key 
up or down to select Yes.
6.Press Center Select Key 
for [OK]. A confirmation message appears.
Deleting a Speed Dial
1.From standby mode, press Center Select Key 
for [MENU].
2.Press Navigation Key 
up or down to highlight Speed Dials, then press Center Select Key 
for [OK].
Contacts in Your Phone’s Memory
3.Press Navigation Key 
up or down to highlight the Speed Dial number.
4.Press Right Soft Key 
[Remove].
5.Press Navigation Key 
up or down to select Yes.
6.Press Center Select Key 
for [OK]. A confirmation message appears.
Phone Numbers With Pauses
Pauses are used for automated systems (i.e., voicemail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code. There are two different types of pauses you can use when storing a number:
Wait (W)
The phone stops dialing until you press Left Soft Key [Release] to advance to the next number.
2-Sec Pause
The phone waits 2 seconds before sending the next string of digits.
G’zOne
G’zOne