Sprint Nextel Bike user manual Tightening torque 18 Nm

Sprint Assembly

Tools required Tools are the first step to proper assembly, you will need a

Allen / Hex key metric set Philips head screwdriver Open-end flat wrenches metric measurements 6mm - 17mm

Front wheel Insert the hub motor wheel into the front fork, ensuring that it is properly seated in the dropout slots. Tighten the nuts alternatively on both sides till the wheel is secured.

Tightening torque 35 Nm

Seat post Insert into the seat tube of the bicycle frame and align. Tighten clamps and ensure seat is firmly fastened. Tigtening torque 16 Nm

6Domark.not adjust the seat post beyond its maximum extension

Handlebar / Stem / Headset Handlebar and stem comes pre-assembled. Loosen bolts on the stem and insert and turn the handle bar assembly until it is in right angles with the frame. Then tighten.

Tightening torque 18 Nm

10