Raleigh None manual First Ride

Page 6

front wheel off the ground by two or three inches, then let it bounce on the ground. Anything sound, feel or look loose? Do a visual and tactile inspection of the whole bike. Any loose parts or accessories? If so, secure them. If you’re not sure, ask someone with experience to check.

Tires & Wheels: Make sure tires are correctly inflated (see Section 4.G.1). Check by putting one hand on the saddle, one on the intersection of the handlebars and stem, then bouncing your weight on the bike while looking at tire deflection. Compare what you see with how it looks when you know the tires are correctly inflated; and adjust if necessary.

Tires in good shape? Spin each wheel slowly and look for cuts in the tread and sidewall. Replace damaged tires before riding the bike.

Wheels true? Spin each wheel and check for brake clearance and side-to-side wobble. If a wheel wobbles side to side even slightly, or rubs against or hits the brake pads, take the bike to a qualified bike shop to have the wheel trued.

!CAUTION: Wheels must be true for the brakes to work effectively. Wheel truing is a skill which requires special tools and experience. Do not attempt to true a wheel unless you have the knowledge, experience and tools needed to do the job correctly.

Wheel rims clean and undamaged? Make sure the rims are clean and undamaged along the braking surface, and check for excess rim wear.

Brakes: Check the brakes for proper operation (see Sections 4.C). Squeeze the brake levers. Are the brake quick-releases closed? All control cables seated and

securely engaged? Do the brake pads contact the wheel rim squarely and make full contact with the rim? Do the brake pads touch the wheel rim within an inch of brake lever movement? Can you apply full braking force at the levers without having them touch the handlebar? If not, your brakes need adjustment. Do not ride the bike until the brakes are properly adjusted by a professional bicycle mechanic.

Quick Releases: Make sure the front wheel, rear wheel and seat post quick releases are properly adjusted and in the locked position. See Section 4.A and 4.B.

Handlebar and saddle alignment: Make sure the saddle and handlebar stem are parallel to the bike’s center line and clamped tight enough so that you can’t twist them out of alignment. See Sections 3.B and 3.C.

Handlebar ends: Make sure the handlebar grips are secure and in good condition. If not, have your dealer replace them. Make sure the handlebar ends and extensions are plugged. If not, plug them before you ride. If the handlebars have bar end extensions, make sure they are clamped tight enough so you can’t twist them.

!WARNING: Loose or damaged handlebar grips or extensions can cause you to lose control and fall. Unplugged handlebars or extensions can cut you and cause serious injury in an otherwise minor accident.

D. First Ride

When you buckle on your helmet and go for your first familiarization ride on your new bicycle, be sure to pick a controlled environment, away from cars, other cyclists, obstacles or other hazards. Ride to become familiar with

6

Image 6 Raleigh None manual First Ride
Contents For multi-speed bicycles Read it before you take the first ride On your new bicycleGeneral Warning Contents Special note for parents First Safety FirstMechanical Safety Check Bike FitFirst Ride Safety BasicsRiding Safety Off Road Safety Wet Weather RidingOff Road respect Night Riding Tighten any that are bent or looseExtreme, Stunt, Or Competition Riding Changing Components or Adding Accessories FitStandover Height Saddle Position Use your bike for jumping or stunt riding, read .F againHandlebar Height And Angle Brake reach Control position adjustmentsTech WheelsAdjusting The Quick Release Mechanism Front Wheel Secondary Retention DevicesInstalling a Quick Release Front Wheel Installing a Quick Release Rear Wheel Removing a Quick Release Rear WheelInstalling a Bolt-on Front Wheel Installing a Bolt-on Rear Wheel Seatpost Quick ReleaseRemoving a Bolt-on Rear Wheel Brakes How Brakes Work Shifting Gears Shifting GearsHow a Derailleur Drivetrain Works Shifting The Rear DerailleurHow An Internal Gear Hub Drivetrain Works Shifting The Front DerailleurWhich Gear Should I Be In? Shifting Internal Gear Hub GearsPedals Bicycle Suspension Tires and Tubes TiresService Tire ValvesService Intervals If Your Bicycle Sustains An Impact Page Raleigh America, Inc. Bicycle Limited Warranty