Assembly
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition. Do not dispose of the packing material until the assembly is completed. Tools have been provided for you to use when assembling the product. If you need assistance please go to our website at www.keysfitness.com or call 1
1. Attach the Rear Stabilizer(3) onto the Main Frame(1) with two Carriage Bolts(75), two Arc Washers(5) and two Cap Nuts(6).
Figure 1
2. First, thread the Right Pedal(27) into the Right Crank Arm(23). Tighten the pedal securely using the wrench that has been pro- vided. Next, find the Pedal Strap marked “R” and snap one of the 3 hole ends onto the inside of the pedal then snap the other 3 holed end onto the outside of the pedal. Repeat step to install the Left Pedal(28) into Left Crank(24).
Note: The Left Pedal(29) is reverse thread- ed. You will turn the pedal counter clock- wise to thread it into the Left Crank Arm(24).
Figure 2
7