Specialized Safire manual Fork / Seat Post Setup Information

Page 7

FORK / SEAT POST SETUP INFORMATION

WARNING! The Stumpjumper frame is compatible ONLY with single crown forks that have travel of 4.72” (120mm) or less. Use of different styled forks or forks with longer travel may result in catastrophic failure of the frame which may result in serious personal injury or death.

SEATPOST MINIMUM INSERTION: To prevent damage to the frame, it’s important to have a minimum amount of seatpost in the seat tube.

Carbon frames:

Small / Medium frame - 70mm insertion

Large / X-Large frame - 100mm insertion

Aluminum frames:

If you cannot see the seatpost tube through the seat tube hole, your seatpost is too far extended. If a greater saddle height is required, replace the seatpost with a longer one.

SM/MD:70mm

LG/XL:100mm

Image 7
Contents Page Page Table of Contents Introduction Introduction Service and Modifications Fork / Seat Post Setup Information Frame Features Frame Geometry Stumpjumper FSR Carbon SJ/SAFIRE Carbon Frame GeometryStumpjumper FSR SJ/SAFIRE Alloy Frame GeometryRear Air Shock Setup Rear Shock SetupGuard Pins Derailleur Guard InstallationStumpjumper / Safire FSR Carbon Instructions Bottom Bracket Link Bearing Kit Parts SBC Limited Warranty Useful Product Life Cycle