Huffy 214953C manual Do not Over

Page 13

6. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).

6

8

7

4

5

7. Insert pole assembly into tank assembly as shown.

6

WARNING!

 

TWO PEOPLE REQUIRED

7

 

FOR THIS PROCEDURE.

 

FAILURE TO FOLLOW THIS

 

WARNING COULD RESULT

8

IN SERIOUS INJURY AND/OR

PROPERTY DAMAGE.

 

IMPORTANT!:

DO NOT OVER

TIGHTEN

8. Carefully place unit on its side. Secure pole bottom (6) to tank with anchor strap (52), washers (9 & 13) and nut (10) as shown. Upright unit.

NOTE:

Keep unnecessary pressure off of the pole assembly when in this position. Two people recommended for this procedure.

IMPORTANT!:

DO NOT OVER

TIGHTEN

6

1

9

13

10

52

13

12/03

P/N 214953C

Image 13
Contents Portable System Before YOU Start U.S.1-800-558-5234 and Canada 214953C 12/03 Safety Instructions Front Parts List See Hardware Identifier Hardware Identifier Bolts Hardware Identifier Nuts & Washers Section a Assemble the Base 12/03 214953C Pole Sections Do not Over Secure strut tubes 11 to bottom pole as shown FIG. a 214953C 12/03 Section B Assemble the Base Refer to instructions Mounting nuts Completed Assembly Do not Over Tighten Do not Leave Apply height and transport label To front of pole as shown Avertissement Warnung ¡ADVERTENCIA Insert net into bottom of clip as shown Consignes DE Sécurité Légende Quantité No de réf. Description 214953C 12/03 Advertencia 214953C 12/03 12/03 214953C Warnung · Diesem Modell können zusätzliche Teile beigepackt sein 214953C 12/03