Huffy 1051 manual Section a Assembling the McCALLS Rebounder

Page 4

SECTION A : ASSEMBLING THE McCALL'S REBOUNDER

1.Tip base on it's side and install casters (2) to the bottom of base (1) as shown using bolts (22), lockwashers (31) and nuts (27).

22

WARNING

TWO PERSON MINIMUM

REQUIRED FOR THIS

PROCEDURE. NOT

FOLLOWING

RECOMMENDATION MAY

RESULT IN BODILY

INJURY.

31

27

2

2. Attach collar (8) to outer pole (5) as shown with T-Screw bolt (7). Tighten

completely.

NOTE:

 

THE T-SCREW (7) IS USED TO SECURE

 

COLLAR TO OUTER POLE (5) UNTIL

 

STRUTS ARE ATTACHED (STEP 4).

5

AT THAT POINT THE

 

T-SCREW (7) CAN BE LOOSENED.

 

6

8

7

P/N 211670

12/02

4

12/02

P/N 211670

 

Image 4
Contents McCalls Rebounder McCalls Rebounder Hardware Identifier Section a Assembling the McCALLS Rebounder 12/02 11 10 TOP Bottom 12/02 12/02 Items 34 & 23 Come Tighten completely 9/16 wrench needed Section B Operating the McCALLS Rebounder Fig. a