Impex CB-181 manual Assembly Instruction, Diagram

ASSEMBLY INSTRUCTION

Tools Required for Assembling this Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten Nuts and Bolts until instructed to do so.

B.) Connect the Right & Left Upright Beam (#1 & #2) by a Cross Brace (#3) in the Mid-span. Secure each end of the Cross Brace with two M8 x 2 ½” Hex Bolts (#21), one 1 ¾” x 2 ¾” Bracket (#10), four ∅ 5/8” Washers (#27), and two M8 Aircraft Nuts (#29).

C.) Place the Backrest Adjustment Bar (#7) onto the selected on the Upright Beams to obtain the desired backrest incline.

DIAGRAM 1

5