Impex IGS-8858 manual Assembly Instruction, See Diagram

Page 7

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left & Right Upright Beam (# 1 & #2) by a Cross Brace (#4) in the mid span. Secure them with M10 x 3 ¾” Carriage Bolts (#40), one 5 ½” Bent Bracket (#16), two ¾” Washers (#49), and two M10 Aircraft Nuts (#52) on each side.

B.) Insert two Crutches (#6) into the top openings on the top of Left & Right Upright Beams. Insert two M18 Lock Knobs (#31) through selected holes to obtain desired height.

C.) Place the Backrest Adjustment Bar (#5) on the selected slot on the Upright Beams to obtain the desired backrest incline.

DIAGRAM 1

6

Image 7
Contents Impex INC Iron Grip Strength Weight BenchBefore YOU Begin Table of ContentsImportant Safety Notice Page Hardware Pack Hardware Pack See Diagram Assembly InstructionDiagram Diagram Diagram Diagram Page Parts List Description Impex INC