Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Step 5
Insert Right Slide Frame (7) onto Slide Guide Tube (5) as shown and lock into one of the holes in tube.
Attach Slide Guide Tube (5) to Inner Base (1) with Bolt (41), Washers (53) and Nylon Lock Nut (54).
Slide Top Frame (8) onto Guide Rods (9) and Slide Guide Tube (5) and connect as shown, using Bolts (46), Washers (53), Nylon Locknut (54), and Bolt (41).
Secure Top Frame (8) to Right Upright (3) using Bolts (40), Washers (53) and Nylon Lock Nuts (54).