Parts
Assembly
Hint: Some parts were placed inside the lower post for shipping.
Net/Ring
Assembly
Upper Post
Backboard
4
Collar
CAUTION
This product contains small parts
in its unassembled state. Adult assembly is required.
1 Backboard
Side Edge | Side Edge |
| 3 |
| Ring Tab |
|
|
| |
Groove |
| ||
Ring
Groove | Ring |
| Tab |
5
Rim | Lower Post |
6
Ball | Plug |
Base
#6 x 5/8" Screw - 4 | Note: Label not shown. |
SHOWN ACTUAL SIZE
Proper label application will help to keep the label looking its best!
•Wash your hands before applying the label.
•Make sure the area where the label will be applied is clean and dry. Wipe the backboard with a clean, soft, dry cloth to remove any dust or oils.
•For best results, avoid applying the label more than once.
•Peel the backing from one half of the label. Do not remove all of the backing!
•Align the side edge of the label (where backing is removed) with the side edge of the label area on the backboard.
•Carefully apply the side edge of the label to the side edge of the label area on the backboard.
•While rubbing the label in place, continue to peel the backing from the other half of the label.
•After applying the label, rub the label firmly with a cloth to make sure the label is adhered to the backboard.
•Dispose of the label backing properly.
2
Base | “T” End | Plug |
•Bend the “T” end of the plug and insert it into the hole in the base.
Note: After assembly is complete, fill the base with water or approximately 50 lbs. of sand (water and sand not included) to keep this product stationary. Simply lift the plug, fill the base, and replace the plug.
•Place the loops at the top of the net into the grooves on the ring.
•Pull each loop through a ring tab, as shown.
4 | Net Assembly |
| Hole |
Hole
Rectangular
Tabs
Rim
Hole | Hole |
•Place the rim on a flat surface with the rectangular tabs facing up.
•Locate the four screw holes on the underside of the net assembly.
•Align the four screw holes on the underside of the net assembly with the four holes in the rim.
•Place the net assembly onto the rim.
2 | 3 |