AquaBrew EX3 manual Troubleshooting & Maintenance, General Maintenance

Page 10

troubleshooting & Maintenance

Troubleshooting

Problem: Unit is unstable or rocks while in use.

Solution: Make sure unit is on a solid, level surface. Adjust the front and rear adjustment feet until all 6 feet are sitting solid on the floor.

Problem: No power at console.

Solution: Try using another outlet or testing something else at the outlet being used to make sure there is power at the outlet. If still a problem contact LifeSpan Customer Service.

Problem: Rough feeling in pedals when in use.

Solution: Clean the rails with a dry cloth. Any debris on the rails will give a rough feeling when in use.

Problem: Excess play in the handlebars or pedals.

Solution: Using the provided assembly tools, go over the Elliptical to make sure all assembly hardware is tight.

General Maintenance

1.Keep the unit clean and dry. It is a good idea to wipe the unit down after each workout to keep it clean.

2.Some material from the Roller Wheels will come off and leave deposits on the rails, this is normal. With a dry towel wipe the rails down as needed. Any debris on the rails can create a rough feeling in the pedals.

3.If the unit is not going to be used for any extended period of time it is a good idea to unplug the unit and store in a clean environment.

14

Image 10
Contents Elliptical Table of contents Welcome to LifeSpan Exclusions and Limitations Limited home use warrantySpecifications RegistrationImportant safety precautions find a certified health fitness instructorGetting fit AGEAttach Handlebars See Figure Assembly instructionsSecure Frame See Figures 1 Attach the Display Console Frame See FigureInterval Weight LossElectronics overview Exercise programs MountainElliptical operations QuickstartTroubleshooting Troubleshooting & MaintenanceGeneral Maintenance Box Park City, Utah