@Speakers
To connect the speaker cords
1Push 2Insert | 3Release |
•When connecting the speaker cords, match their polarity with that of the speaker terminals: blue/red/green/white to
(+) and black to
For CA-DXU10
From front right speaker (black/blue)
From front left speaker (black/blue)
From center speaker (black/green)
From surround right speaker (black/white)
From surround left speaker (black/white)
From left | From right subwoofer | |
subwoofer | ||
(black/red) | ||
(black/red) | ||
|
For CA-DXU8
From front right speaker (black/blue)
From front left speaker (black/blue)
From center speaker (black/green)
From surround right speaker (black/white)
From surround left speaker (black/white)
From subwoofer (black/red)
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.
•The front and center speakers and subwoofer(s) are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.
–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers.
Then wait at least 30 minutes before turning on the TV’s main power switch again.
Some TVs may still be affected even though you have followed the above instruction. If this happens, move the speakers away from the TV.
• DO NOT connect more than one speaker to each terminal.
• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
Speaker layout
To enjoy
For
Front left |
| Front right | |
Center speaker | speaker | ||
speaker | |||
|
|
Subwoofer | Subwoofer |
Surround left speakerSurround right speaker
For
Front left | Center speaker | Front right |
speaker | speaker |
Subwoofer
Surround left speaker | Surround right speaker |
5