BASIC OPERATIONS
Basic functions for disc playback
Turning on the power of this unit
Press the POWER button to turn on this unit. The STANDBY indicator is turned off and the display is turned on.
Main unit | Remote control unit |
POWER
POWER
Remote control operation (for XL-FZ258BK)
Point the remote control unit towards the remote sensor and operate it steadily and carefully. The remote control unit can be used within a range of about 7 meters (23 feet) from the remote sensor, and at angles of up to about 30 degrees.
Press again to turn off the power and activate the standby mode. The STANDBY indicator is lit.
The power is automatically turned on also by;
ÖPressing the 0 OPEN/CLOSE button.
ÖPressing the 3 PLAY/8 PAUSE button on the main unit or the 3 button on the remote control unit.
Notes
ÖA small amount of power (4 watts) is consumed even in the standby mode.
ÖTo turn off the power completely, disconnect the power cord from the wall outlet.
Loading discs in the disc tray
Use the 0 OPEN/CLOSE button to open and close the disc tray.
Main unit | Remote control unit |
OPEN/CLOSE | OPEN/ |
| CLOSE |
0 |
|
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.
2. Place discs on the disc tray according to the groove with their label side up.
To turn theÖdisc tray and locates the disc tray to the just facing you,Press DISC SKIP button.
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.
CAUTION
When loading discs in the disc tray, be sure to put the discs according to the groove. Otherwise, the discs will be dam- aged when the disc tray is closed, and cannot be removed from the unit.
Playing a disc
Press the 3PLAY/8PAUSE button on the main unit or the 3button on the remote control unit.
Main unit | Remote control unit |
PLAY/PAUSE
3
6
The 3 indicator lights on the display and playback starts.
To stop playback temporarily, press the 3 PLAY/8 PAUSE button on the main unit or the 8 button on the remote control unit.
The 8indicator lights on the display and playback stops temporarily. To resume playback, press the 3PLAY/8 PAUSE button on the main unit or the 3 button on the remote control unit.
Adjusting the headphones level
Insert the headphones plug into the PHONES jack and turn the PHONES LEVEL control to adjust the volume level.
Stopping playback
Press the 7STOP/CANCEL button on the main unit or the 7button on the remote control unit.
Main unit | Remote control unit |
STOP/CANCEL
7
7
Page 7