3.Attach the Front Leg (8) to the Frame (2) with two M8 x 43mm Bolts (39), four M8 Washers (16), and two M8 Nylon Locknuts (17). Note: Do not tighten the Locknuts yet.
4.Attach the Frame (2) to the Crossbar (3) with two M8 x 55mm Bolts (18), the Support Plate (38), and two M8 Nylon Locknuts (17).
Tighten the Nylon Locknuts (17, 33) used in steps 1–4.
5.Tap two 30mm Square Inner Caps (22) into the ends of the Leg Lever (4).
Tap a 25mm Round Inner Cap (24) into the indi- cated end of the weight tube on the Leg Lever
(4). Tap the 25mm Round Angled Cap (20) onto the other end of the weight tube.
6.Lubricate the M10 x 63mm Bolt (32) with grease. Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (33). Note:
Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.
3 |
|
|
|
|
39 | 16 |
|
|
|
|
|
|
| 2 |
|
|
| 16 |
|
|
| 16 | 17 |
|
| 8 |
|
|
|
4 |
|
|
|
|
|
|
| 38 | 17 |
|
|
|
| |
|
|
|
| 3 |
2 | 18 |
|
|
|
5 |
|
|
|
|
| 22 |
|
| 4 |
|
|
|
| |
| 24 |
|
| 20 |
|
|
|
| |
|
| Weight |
| 22 |
|
|
|
| |
|
| Tube |
|
|
6 |
|
|
|
|
| 32 | Lubricate |
| |
4 |
|
|
|
|
|
|
| 33 |
|
|
|
| 8 |
|
6