JVC CA-MD70R manual Input a character, Repeat steps 5 and 6 to input other characters

English

Continued

Amplifier/tuner

DISPLAY/CHARA. DIRECT TITLE INPUT MULTI

(CONTRAST) (DISPLAY PATTERN) ENTER JOG

MD recorder

MD IN lamp MD Loading slot 0

TITLE ¿ CURSOR fl CANCEL SET

Continued

6 Input a character.

• EX. When entering “H”

1)Rotate MULTI JOG to select the row where a character you want exists.

• In this example, select the row of “F G H I J.”

Select the row

2)Press one of the DIRECT TITLE INPUT buttons to select the character position in the row.

The selected character is input, and the character entry position moves to the next.

•In this example, press 3 which corresponds to “H” in the row of “F G H I J.”

•To move the character entry position while entering a title, press ¿CURSOR fl.

•If you have entered an incorrect character, press CANCEL to cancel the last entry.

7 Repeat steps 5 and 6 to input other characters.

•The main display can only show 7 characters at a time. If you enter the 8th character, the first character disappears, and so on.

8 Press ENTER twice to finish title entry.

•If you want to cancel the editing, press TITLE after pressing ENTER once in this step.

9 Press 0to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER twice in step 8 above. When you press it twice, MD stops play.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER twice in step 8 above. When you press it twice, MD stops play.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER twice in step 8 above. When you press it twice, a track title is assigned to the track where you have started the title entry.

– 39 –