Weider WESY68632 user manual Troubleshooting, Cleaning the BAR Guides

Page 19

TROUBLESHOOTING

CLEANING THE BAR GUIDES

Over time, dust may build up on the Bar Guides (55), causing a squeaking noise as the resistance system is used. If this occurs, wipe off the Bar Guides with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.

ADJUSTING THE RESISTANCE

When the resistance setting changes, the motor will be heard. To prevent damage to the motor, do not pull any of the cables while the resistance setting is changing. If the motor has difficulty adjusting the resistance level and no cable is being pulled, there may be too much tension on the upper cable (B). Adjust the tension as described below.

To decrease the tension on the upper cable (B), turn the two 3/8” x 38mm Tension Screws (106) twice, counterclockwise. Select the desired resistance set- ting. Repeat this step if necessary.

	55
B	106

19

Image 19

Contents Model No. WESY68632 Serial No QUESTIONS?Customer HOT Line Table of Contents Keep hands and fingers clear of this area Important Precautions Before YOU Begin Assembled DimensionsMake Things Easier for Yourself AssemblyAttach the other Wheel 21 to the Base 1 in the same manner Page Nylon Jamnut 78. Do not tighten the Locknut Yet Connector should slide easily into the sockTighten the 1/2 Nylon Jamnut 105 Do not tighten the Locknut yet Bolt yet Tighten the Bolt yet106 Repeat this step with the Leg Lever Upper Cable Adjustment Attaching the High Pulleys AdjustmentsRemove the high pulleys when not in use Adjusting the SeatAdjusting the Resistance Attaching the AccessoriesAttaching the LEG Lever Storing the Resistance System Adjusting the BackrestPlugging in the Resistance System Upper Cable B Cable DiagramCleaning the BAR Guides TroubleshootingExercise Guidelines Cooling Down Muscle ChartStaying Motivated Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseMonday Part Identification Chart Qty Description Part LIST-Model No. WESY68632Exploded DRAWING-Model No. WESY68632 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT