JVC CA-D752TR manual Standard Recording, Check the recording direction for the tape

Page 37

RECPAUSE

TAPE CONTROL

\

CAUTION: If recordings you have made have excessive noise or static, the Unit may be too close to a TV which was on during recording. Either turn off the TV or increase the distance between the TV and the System.

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save your time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a CD or the Tuner. You can also record from an auxiliary source with this procedure.

Using the Unit

1.Insert a blank or erasable tape into Deck B.

2.Press REVERSE MODE if you want to record on both sides of the tape.

Reverse Mode comes on.

• When using Reverse Mode, insert the tape so that it will be recorded in the forward (3) direction.

3.Check the recording direction for the tape.

Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the directions are different, press 7STOP after pressing TAPE ª £to set the tape direction.

•When using the Reverse Mode to record both sides of a tape, check that the Tape Direction

indicator is in the forward (3) direction. If the direction indicator is not in the forward (3) direction, press TAPE ª £then press 7STOP.

4.Prepare the source, for example, by tuning in a radio station, loading CDs, or turning on connected equipment.

5.Press REC START/STOP.

The REC indicator lights up and the System begins recording.

Using the Remote Control

1.Insert a blank or erasable tape into Deck B.

2.Press REVERSE MODE on the Unit if you want to record on both sides of the tape.

Reverse Mode comes on.

• When using Reverse Mode, insert the tape so that it will be recorded in the forward (3) direction.

3.Prepare the source, for example, by tuning in a radio station, loading CDs, or turning on connected equipment.

4.Press REC PAUSE.

The REC indicator starts flashing.

5.Press TAPE CONTROL then press 3.

Recording starts.

The REC indicator stops flashing and remains lit.

Notes for using Reverse Mode for recording

When recording with Reverse Mode on, the System automatically stops when it reaches the end of the reverse (2) direction. To record on both sides of a tape, make sure that the recording direction for the tape inserted into Deck B is forward (3), and that the Tape Direction indicator is also forward (3), before you start recording.

To pause at any time during the recording process

Press REC PAUSE on the Remote Control. Then press 3 on the Remote Control or REC START/STOP on the Unit to restart recording.

To stop at any time during the recording process

Press REC START/STOP on the Unit again, or press 7 on the Remote Control.

English

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CA-D752TR If in Doubt Consult a Competent Electrician Achtung Ausreichende Belüftung Voorzichtig Goede ventilatie vereistPrecaución ventilación correcta Attenzione Per una corretta ventilazioneClass Laser Product Installation of the Unit FeaturesPower cord How This Manual Is OrganizedTable of Contents How to Put Batteries in the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Standard Type Connector Not SuppliedConnecting the Optional Speakers Connecting the SpeakersRight Speaker VCR or other equipment Connecting Auxiliary EquipmentOn the Unit On the Remote ControlCompu Play buttons Common Operations Demo ModeDisplay Turning the Power On and Off Setting the ClockTurning the System On Turning the System OffBalance Adjustment Adjusting the VolumeReinforcing the Bass Sound Sound Modes Customizing a Sound ModeAdjusting the Rear Speaker Level When a Rear Speaker is ConnectedUse Multi Control to adjust to any Sound Mode desired FrontListening to Auxiliary Equipment Turn down the volume level to Press AUXDolby Surround Accessing the Dolby Surround Functions3CH Logic Delay Time Mode Centre Speaker ModeAdjusting the level of the Centre Speaker Adjusting the level of the Rear Speakers For PRO Logic onlyGetting Ready To Use Dolby Pro Logic Setting-up Dolby Pro LogicSpeaker Arrangements for Dolby Pro Logic Setting-up Dolby 3ch Logic Using Dolby SurroundGetting Ready To Use Dolby 3 Channel LogicTuning in a Station Using the TunerSwitching between Frequency Bands On the Unit Press FM/AMChanging the FM Reception Mode Presetting StationsThree Ways to Select a Station What Information RDS can Provide Receiving FM Stations with RDSChanging the Display Searching for Programmes by PTY codes Setting EON Stand-by reception Press PTY/EON twiceEON Function Press Select + or Select to select a PTYSelect information you want by pressing Select + or Select Alarm functionPress PTY/EON TAï News ï Info ï OFF ïEntering CD Operation Mode with the Remote Control Using the CD PlayerDisc indicator CD indicatorLoading CDs Basics of Using the CD Player Continuous PlayPlaying a CD Selecting a Track Locating a Track with the Remote Control DirectlyFast Forward / Reverse Changing Discs While PlayingProgramming the Playing Order of the Tracks On the Remote Control Press PROGRAM/RANDOM on the UnitSelect a disc with Disc 1 to Track numberChecking the Programme Random PlayChanging the Programme Press the number keys 1 to 10 and +10 to select the tracksTray Lock Function Repeating a Track or the DiscsLocking the Trays Unlocking the TraysEntering the Tape Operation Mode with the Remote Control Using the Cassette DeckTape ª £ Music Scan Regular PlayFast Left and Fast Right Finding the Beginning of the Current SelectionReverse Mode on Reverse Mode OFF Reverse ModeThings to Know before You Start Recording RecordingCheck the recording direction for the tape Standard RecordingPress Tape Control then press To pause at any time during the recording processAuto Edit Recording CD Direct RecordingRecording AM Station to Tape Tape to Tape Recording Dubbing How to Use DubbingPress Dubbing To stop dubbing, press 7STOPTIMER/CLOCK Using the TimerPress TIMER/CLOCK again Setting the Daily TimerSet the time you want the Unit to turn on Set the time you want the Unit to turn offSetting the Volume Level Turning the Daily Timer On and OffTo change the Daily Timer setting To use a Cassette Deck as the sourceSetting the Recording Timer Turning the Recording Timer On and Off Setting the Sleep TimerTo change the Sleep Timer setting To cancel the Sleep Timer settingExample Setting Operation Timer PriorityRecording Timer Sleep TimerCompact Discs Cassette Tapes Care and MaintenanceMoisture Condensation Cassette DeckSymptom TroubleshootingPossible Cause ActionSpecifications EN, GE, FR, NL, SP, IT 0498TNMNATJEM

CA-D752TR specifications

The JVC CA-D752TR is a versatile and compact stereo system that delivers impressive sound quality and a plethora of features for music enthusiasts. Designed for modern convenience and aesthetic appeal, this system integrates various playback options, making it ideal for both casual listeners and audiophiles.

One of the standout features of the CA-D752TR is its robust audio performance. Equipped with a powerful amplifier and high-quality speakers, it produces clear and dynamic sound across different music genres. Its output power ensures that it can fill a room with rich audio without distortion, making it suitable for parties or quiet evenings at home.

The system comes with integrated CD playback capability, allowing users to enjoy their favorite CDs with ease. It supports various disc formats, ensuring compatibility with a wide range of media. Additionally, the CA-D752TR features an FM/AM tuner, enabling users to listen to local radio stations, further expanding their listening options.

Incorporating modern technology, the JVC CA-D752TR includes Bluetooth connectivity, allowing for wireless streaming from smartphones, tablets, or other Bluetooth-enabled devices. This feature enhances the user experience by providing the flexibility to play music from apps or playlists without the need for physical connections. Furthermore, it supports USB playback, providing another convenient way to access digital music files.

Another notable characteristic of the CA-D752TR is its user-friendly interface. The system is equipped with an intuitive remote control and clear display, making navigation through tracks and settings seamless. It also includes multiple audio input options, such as auxiliary ports, ensuring compatibility with various devices.

The design of the JVC CA-D752TR is sleek and modern, making it an attractive addition to any home environment. Its compact size allows for easy placement in various settings, whether it be on a shelf, desk, or entertainment center.

Overall, the JVC CA-D752TR stands out as a multifunctional stereo system that combines quality sound performance with modern technology and convenience. Its feature-rich design, including CD playback, Bluetooth streaming, and auxiliary inputs, makes it a great choice for anyone looking to enhance their audio experience at home. Whether hosting a gathering or enjoying a quiet night in, the CA-D752TR caters to a variety of audio needs with style and functionality.
Top Page Image Contents