Graco 3A1332A important safety instructions Kit Parts, Install the Dispense Valves

Instructions/Parts

24H255 3-Color
Valve Stack Kit	ENG
	3A1332A

To convert ProMix® 2KE Electronic Proportioners to a 3-color valve stack. For professional use only.

Important Safety Instructions

Read all warnings and instructions in this manual and in your separate ProMix 2KE manuals. Save these instructions.

Kit Parts

3.Install new o-ring (708) on the spacer (707). Install new o-ring (709) on the bottom of the 1-color mani- fold (M). Align manifolds (M and 701). Install four screws (711). Torque to 8-10 ft-lb (11-14 N•m).

4.Reinstall the valve stack.

5.Install the solenoid valves. See page 2.

Ref.	Description	Qty.
701	MANIFOLD, valve, 3-color	1
702	O-RING	2
703	RETAINER, seat, dump valve	2
704	O-RING, PTFE	2
705	VALVE, dispense	2
707	SPACER, manifold	1
708	O-RING, PTFE	2
709	O-RING	1
710	FITTING	1
711	SCREW, cap, socket hd	4
712	PLUG	2
713	VALVE, solenoid; see page 2	2
715	TUBING, red; 5/32 in. (4 mm) OD;	1
	6 ft (1.83 m); see page 3
716	TUBING, green; 5/32 in. (4 mm)	1
	OD; 6 ft (1.83 m); see page 3
718	CONNECTOR, male; see page 2	4

Install the Dispense Valves

1.Relieve the pressure and remove the valve stack as explained in your ProMix 2KE Repair/Parts manual 3A0870.

2.Remove the fitting and o-ring from the existing 1-color manifold (M).

1

2

These parts are shipped loose.

Torque to 8-10 ft-lb (11-14 N•m).

M

701

702

703

704

708

710

705

711

1 2

7081

7071

7091

712

ti16302a