Installation and Wiring Instructions

for Pluggable Motor Replacement - _ 7q'1ul

ThlsKitContains:
I	Motor Assembly 3 •	_ _"_" _ _/'
2	Vg'Female Tem!lnals(Insulated)		3 3 q E q _	Electrical Shock	Hazard
I	Sheet, I_slr_oUon	_ _€_ -1 8		Electrical Shock	Hazard
I	Sheet, I_slr_oUon	_ _€_ -1 8
				OLsoonneat power	before
				_;ervi_ng.
				Failure to do so eould result In
				I	I ii1
NOTETOTHEINSTALLER:		Thlsm	tarkitlsenButho	zedFSP_rvicereplscemerltparlloryourapplloation.
The motor m this kit may or mw not be Identical to your old motor. If your culTent motor has the pluggable.

I"motor marltch, replaoe the servc.e..°motor, in the same manner as you removed your dele_llve motor."LIf your defeolive mof_r has the switch where the w[m lead from the main harness eannects to the motor

s_tch Indivklually, carefully follow Instructions below-- ......

Potental Rre Hazard and/or

Nulsanoe "l'dpptng of Motor Protector

DO NOT under any oiroumstance attempt to remove or replace the motor 8witoh from this puggable service motor. The swituh is a non..serviceable.bomponent.

Failure to do so oould result in fire, serious injury or death.

OVERLOADI

1.Remove defective motor using standard motor removal proaedures

2.Compare and no_ethe difference between the motor switch of fire delective motor and the switch of the new replaoement motor, ff the switchesare the same,

simply -instal! the motor In reverse order you've -removed the defective motor. See Figure 1.

NOTE: Overload proteotor Is part of the switch on the replaoBrnent motor and separate on the deleotive motor.

OLD

0EFECllVEg01_

P,0/JqE

Corpo_to. 1111H	InstrucSonSheet279788 Rev. A 6/94