333504B
Mobile Lubrication Library
Telehandler Loadall
Suggested automated lubrication system layout for Telehandler Loadall
Kit No.: 24R378, G3, USP, 21PT
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all related manuals. Save all instructions.
| Related Manuals |
| |
Manual No. | Manual Title |
|
|
3A0414 | G3 Pump |
|
|
3A0525 | Pressure Relief Valve |
|
|
3A0528 | Remote Manual Run |
|
|
3A0860 | USP Valves |
|
|
Fluid leaks from incorrectly installed or ruptured compo- nents, and/or failure to verify the components are prop- erly installed and tested, can result in serious injury such as fluid spraying in the eyes or on skin and fluid injection, or equipment damage.
To prevent injury or equipment damage, installation must be done by a professional and tested prior to use. Con- sult Parker literature for specific hose assembly instruc- tions. These instructions are available from your Parker representative or at www.Parker.com/pdf.
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to replace the installation and maintenance instructions provided by the original equipment manufacturer.