SecuretheDrainHose, Level theWasher | Whirlpool W10240438A specs

4.Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

HOT COL

5.Attach the cold water hose to the inlet valve labeled cold.

6.Screw on coupling by hand until it is seated on the washer.

7.Using pliers, tighten the coupling with an additional two- thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Check for leaks

Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this in a later step.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

If you connect only one water hose, you must cap off the remaining water inlet port.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

SecuretheDrainHose

1.Drape the power cord over the console.

2.Remove any cardboard used to move washer.

Level theWasher

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

Properly level your washer to avoid excessive noise and vibration.

1.Move the washer to its final location.

2.Rock the washer back and forth to check whether all four feet are stable and in firm contact with the floor. If the washer rocks, your model may be one that comes with 3 feet preset at the factory. It will be necessary to adjust the right front foot to level the machine. If all 4 feet were preset at the factory, minor adjustments may be needed to level the washer on your floor.

3.For machines with an adjustable right front foot, lower the right front foot until it contacts the floor. Using pliers, rotate the foot up to an additional 1 ½ turns.

Beaded tie strap

3.Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. See view A or B.

ABC

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

W10240438A specifications

The Whirlpool W10240438A is a high-performance refrigerator water filter designed to provide clean and great-tasting water for your household. As part of Whirlpool's commitment to quality and innovation, this filter works seamlessly with various models of Whirlpool refrigerators, ensuring that you have access to pure water and ice for drinking and cooking.

One of the main features of the W10240438A filter is its advanced filtration technology. This filter utilizes activated carbon and other premium filtration materials to reduce contaminants commonly found in tap water, such as chlorine, sediments, and heavy metals. The result is purified water that enhances the flavor of beverages and meals, making it an essential component for health-conscious consumers.

The W10240438A filter is designed for easy installation and replacement. It employs a straightforward twist-and-lock system that allows users to replace the filter without the need for special tools or plumbing expertise. This convenience ensures that maintaining water quality is a hassle-free experience, promoting regular filter changes for optimal performance.

Additionally, the W10240438A boasts a long-lasting lifespan, typically lasting up to six months, depending on water usage and quality. This durability means that families can enjoy clean water for an extended period without frequent replacements, providing both convenience and cost-effectiveness. Users are encouraged to monitor filter performance and replace it as needed to ensure continuous water quality.

The W10240438A filter is also NSF certified, which means it meets rigorous safety and performance standards set by the National Sanitation Foundation. This certification adds an extra layer of assurance for consumers, indicating that the filter has been independently tested for its effectiveness in reducing harmful substances.

While the W10240438A filter is compatible with various Whirlpool refrigerator models, it is essential to check compatibility before purchase to ensure the best fit. The filter's sleek design and compatibility with different brands further enhance its appeal, making it a widely sought-after product in the realm of refrigerator accessories.

In summary, the Whirlpool W10240438A water filter combines advanced filtration technology, easy installation, long-lasting performance, and NSF certification to deliver clean and tasty water for families. Investing in this filter not only ensures high-quality drinking water but also supports a healthier lifestyle. With the W10240438A, Whirlpool continues to uphold its reputation for creating innovative and user-friendly solutions for everyday needs.