Using dryer fabric softeners
dryer fabric softeners are recommended for
) Put one fabric softener sheet on top of the load before starting the dryer. Do not add a fabric softener sheet after the drying cycle has started. Instant heat can cause the fabric softener to spot fabrics.
l
l
Remove fabric softener stains by wetting the stains and rubbing them with liquid detergent or bar soap and rewash. Some fabric softeners can clog the lint screen and slow drying. Use fabric soften- ers labeled as dryer safe.
Saving energy
l l l
l
Use an Automatic cycle to dry most loads. | l Shorten drying times by exhausting dryer | ||
Dry only full loads without overdrying. | properly and cleaning exhaust duct and | ||
Avoid overloading dryer, adding wet items | outside exhaust hood as needed. | ||
- | Keep the lint screen clean. | ||
to a partly dried load, or opening the door | |||
unnecessarily. | - | Use your dryer in a room where room air | |
Plan your laundry to dry one load after |
| temperature is above 45°F (7°C). | |
another. A warm dryer shortens drying time. | - | Sort loads by fabric weight and type. | |
Vacation care
1.Unplug power supply cord or turn off electrical power supply.
2.Clean lint screen.
Voltage requirements
lModel REC3622D operates on 240 or 208 volt household current.
lModels REP3822D and RGC3622D operate on 120 volt household current.
NOTE: Electric dryers using 208 or 120 volts require longer drying times than dryers using
240volts.
240 or 206 volt power supply
14