Hotpoint NWXR473 operating instructions Exhaust Duct, Exhaust Hood

Page 14

Exhaust Duct

Inspect and clean the dryer exhaust ducting at least once a year to prevent clogging. A partially clogged exhaust can lengthen the drying time.

To clean the exhaust duct follow these steps:

1Turn off electrical supply by disconnecting the plug from the wall socket.

2Disconnect exhaust duct from the dryer.

3Vacuum the exhaust duct with the hose attachment.

4Reconnect the exhaust duct to the dryer.

Exhaust Hood

Make sure the inside flaps of the exhaust hood move freely (you may want to check with a mirror).

Make sure inside flaps are fully open when dryer is operating.

Make sure there is not wildlife (birds, insects, etc.) nesting inside the exhaust duct or hood.

Check the inside of the exhaust hood with a mirror to rid of debris

15

Image 14
Contents Dryer 800.626.2000 WelcomeRead all safety information before using If YOU Smell GASSafety Precautions Page Not Operate the Dryer Page Controls on your dryer Press Guard Other dryer features your model hasSignal Drum LampReversing the Door Specialty Care Guide Suggested CareLoading Hints LoadingSorting Exterior Care & CleaningInterior Lint FilterExhaust Duct Exhaust HoodGreasy Spots on Clothes Before you call for serviceDryer Doesn’t Heat Lint on ClothesStatic Occurs Clothes Take Too Long to DryClothes Shrink Clothes are WrinkledVenting the Dryer Correct Venting Incorrect VentingPage Page We’ll be there GE Answer CenterService Contracts Further ServiceDryer Warranty
Related manuals
Manual 24 pages 47.26 Kb