Installation, Water Drain | Hotpoint AQUALTIS TUMBLE DRYER guide

Installation

Where to put your dryer

• Place your dryer at a distance from gas ranges, stoves, heaters, or cooktops because flames can damage the appliance.

If you are going to install the appliance under a work counter, be sure to leave a 10 mm space between the top and any other objects on or above the machine and a 15 mm space between the sides and lateral furnishings or walls. This is to ensure proper air circulation.

10 mm
15 mm	15 mm

Electrical connection

Make sure of the following before you insert the plug into the electrical socket:

•	Ensure your Hands are dry.
•	The socket must be grounded.
• The socket must be able to sustain the machine’s maximum
power, which is indicated on the rating plate (see Dryer Description).
•	Power voltage must be within the values indicated on the
rating label (see Dryer Description).
•	The socket must be compatible with the dryer’s plug. Should
this not be the case, replace the plug or the socket.
!	Do not use extension cords.
!	The dryer must not be installed outdoors, even if the space is
sheltered. It can be very dangerous if exposed to rain or storms.
!	Once installed, the dryer’s electrical wire and plug must be
within reach.

Ventilation

•When the dryer is in use, there has to be adequate ventilation. Make sure you put your dryer in an environment that is not damp and has proper air circulation throughout. Airflow around the dryer is essential to condense the water produced during the washing, the dryer will not operate efficiently in an enclosed space or cupboard.

!If using the dryer in a small or cold room some condensation will be experienced.

!We do not recommend that the dryer is installed in a cupboard but the dryer must never be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the dryer door.

Water Drain

If the machine is positioned close to a drain it is possible to drain the condensed water directly without using the waterbottle. In which case it is no longer necessary to empty the water bottle at the end of each cycle.If the Dryer is positioned above or close to a Washing Machine the same drainage can be used. Just unlink the tube indicated in figure A and connect it to the drainage.

If the drainage is further away than the length of the tube it is possible to buy and connect a tube of the same diameter and the necessary length in order to reach the drainage. To install the new tube just substitute the existing one as indicated in figure B inserting it in the same place.

!The drain tube has to be below 1 m from the bottom of the Dryer.

!Once the Dryer has been installed please assure that the drain tube is not bent or contorted.

Fig. A

Fig. B

! The power cord must not be bent or squashed.

! The power cord is supplied fitted with a BS1363 plug and with

a 13 amp BS1362 fuse. If it is necessary to fit a replacement

fuse, it must be a 13 Amp ASTA approved to BS1362 type.

WARNING: The plug must not be used without a fuse cover.

If a replacement fuse holder/cover is required, it must be of the

same colour coding or wording as shown on the base of the plug.

Replacements are available from authorised dealers.

Moulded plug

Changing the plug

The wires in the power cord are coloured in accordance with the following.

Green and Yellow (Earth)			13A ASTA approved fuse to
wire to terminal marked “E”,			BS 1362.
symbol x, or coloured green	GREEN &
and yellow.	YELLOW
	BROWN	13 ampere fuse
	BROWN
Blue (Neutral) wire to			Brown (live) wire to teminal
Blue (Neutral) wire to	BLUE	CROSS-BAR	marked “L” or coloured red.
terminal marked ”N” or		CORD GRIP
coloured black.

!If the plug being replaced is a non-rewirable type, then the cut-off plug must be disposed of safely. DO NOT leave it where it can be inserted into a socket and create a shock hazard.

!The power cord should be checked periodically and replaced by a cord specially prepared for this dryer and fitted only by authorized technicians (see Service). New or longer power cords are supplied at an extra charge by authorized dealers.

!The manufacturer denies any responsibility should any of these rules not be followed.

!If in doubt about any of the above consult a qualified electrician.

Before you start using your dryer

Once you’ve installed your dryer and before you use it, clean the inside of the drum to remove any dust that could have accumulated during transportation.

AQUALTIS TUMBLE DRYER, AQC9 BF7 specifications

The Hotpoint AQC9 BF7 Aqualitis tumble dryer is a highly efficient and versatile appliance that delivers advanced drying technology to meet the diverse needs of modern households. With a generous 9 kg capacity, this tumble dryer is ideal for families, allowing you to dry large loads of laundry in one go, saving both time and energy.

One of the standout features of the Hotpoint AQC9 BF7 is its innovative Anti-Tangle technology. This helps to reduce tangling of clothes during the drying cycle, ensuring that your garments come out less wrinkled and easier to iron. This feature promotes even tumbling, so clothes are more likely to be dried evenly without clumping together, enhancing the overall drying performance.

The appliance also boasts an impressive energy efficiency rating of B, which means it operates with lower energy consumption compared to many other models in its class. This makes it an environmentally friendly choice while helping to reduce your household energy bills. The dryer’s Heat Pump technology plays a crucial role in achieving this efficiency. It recirculates hot air within the drum, using lower temperatures for drying which protects your clothes and provides better energy savings.

Another notable characteristic of the Hotpoint AQC9 BF7 is its range of drying programs. The dryer features multiple settings tailored to various fabric types and drying needs. From delicate fabrics to heavy cottons, the tailored programs ensure optimal drying results without risking damage to your clothes. The machine includes specific options such as Woolmark-approved programs, which provide gentle drying for wool items, and a rapid dry feature that efficiently dries smaller loads when you're pressed for time.

Moreover, the built-in sensor drying technology is a game-changer. It automatically detects moisture levels in the drum and adjusts the drying time accordingly, preventing over-drying and protecting your garments.

The appliance's user-friendly interface, including a clear LED display, makes it easy to select programs and monitor drying cycles. Its sleek design fits seamlessly into any laundry space, and its compact dimensions offer flexibility for placement in various environments.

In conclusion, the Hotpoint AQC9 BF7 Aqualitis tumble dryer combines capacity, efficiency, and innovative technology, making it a practical choice for anyone seeking a reliable and effective drying solution. With features like Anti-Tangle technology, Heat Pump efficiency, tailored programs, and convenient sensor drying, this appliance is designed to simplify laundry days while caring for your clothes.