Dryer Description
GB
The front
Control Panel
Model & Serial numbers
Control panel
The back
Rating plate
Drum
Filter
Caution: Hot!
Air Intake Vent
Vent Tube fitted here
Drying Guide
HEAT
Button
ALARM
Button (VTD20 only)
ACTIVE
Light (VTD20 only)
Programmes Guide
(VTD20 only)
DELAY |
| Indicator | START |
| |||
Knob |
|
| Button |
(VTD20 only) |
|
|
|
|
|
|
|
|
|
|
|
TIMER/PROGRAMMES |
| Model number |
| ||
Knob |
| (VTD20 or VTD00) |
|
|
|
The START button begins drying a selected programme (see Start and Programmes).
The HEAT button selects drying temperature (see Start and Programmes).
OUT: HIGH heat. IN: LOW heat.
The ALARM buzzer signals the end of a drying cycle (VTD20 only).
OUT: Buzzer ON. IN: Buzzer OFF.
The ACTIVE indicator light signals that your dryer is in use (VTD20 only). This light will glow when the START button is pressed. It will remain on until the door is opened or the power is turned off. This light will be on during a delayed start programme.
The Drying Guide allows you to consult a user friendly table of fabric types and load capacities.
The VTD20 also has a guide to the programmes available.
The DELAY knob sets a delay on the dryer’s start time (VTD20 only): rotate it clockwise until you reach the number of hours you want to delay the start time.
If you have gone too far, turn the knob counter- clockwise (see Start and Programmes).
The TIMER/PROGRAMMES knob sets the drying time or programme: rotate it clockwise, never counter- clockwise, until the indicator is pointing to the time or programme you want to select (see Start and Programmes).
4