Hotpoint TDL32, TDL13, TDL12 manual Controls TDL34 and TVM35, Programme, Setting, Options, Drying

The Controls - TDL34 and TVM35

Heat Switch (OUT low heat, IN high heat) Alarm Switch (IN on) Drying Light Auto Light

Drying Guide Delay Timer Timer Control

Setting Delayed When using the Time Delay, select the number of delay hours you require

Startbefore selecting the drying time. Select the delay period by rotating the timer knob in a clockwise direction, to the number of hours delay you require. The dryer will start its programme when the time selected has elapsed.

Do not rotate the knob beyond 12 hours (maximum delay time), or past the zero stop.

If you have selected more delay than you require, turn the knob anti-clockwise to select the correct time required.

Note: Ensure that the door is closed during the time delay period.

Programme	To set the required programme, all you have to do is turn the Timer Control
Setting	clockwise until the required selection appears in line with the indicator.
	Never turn the Timer Control anti-clockwise.
	This operation also starts the dryer, provided the door is closed, and the
	machine is plugged in.
Programme	1.	Automatic Drying average loads ✽
Options	2.	Automatic Drying large loads ✽

3.Easy Iron Cycle.

4.Timed drying (up to 60 minutes).

5.Cool Tumble Phase.

(i)Automatic The Auto drying programmes will automatically dry most loads to the fully dry

Drying	ready to wear condition. This eliminates the need to guess the drying times
	and saves energy. High Heat MUST be selected (Heat switch IN).
	To select Auto drying, turn the selector to position.
	✽ for average loads and ✽ for large loads.
	✽ Auto drying average loads
	1 to 3kg Cottons, Polycottons or Synthetics (Dry weight).
	✽ Auto drying large loads
	3 to 5kg Cottons (Dry weight).
	When the door is closed the Auto Drying light will glow to indicate that Auto
	drying programme is running.
	When the load is dry, the selector will automatically advance to the 8 minute
	cool tumble phase.
Note:	● If LOW heat is selected for an Auto drying programme, the dryer will
	advance to COOL without drying the load.
	● For acrylics and acrylic mixtures, select LOW heat and use timed
	drying.
	● Small loads (Less than 1kg) must be dried using the timed drying
	programme.

16