Installation

GB	Where to put your dryer
GB	●	Place your dryer at a distance from gas ranges,
	●	Place your dryer at a distance from gas ranges,
		stoves, heaters, or cook tops because flames can
		stoves, heaters, or cook tops because flames can
		damage the appliance.

Minimum gap 10mm	●If you are going to install the
	appliance under a work
	appliance under a work
	counter, be sure to leave a
	10mm space between the
Minimum gaps	top and any other objects
15mm	on or above the machine and
	on or above the machine and
	a 15mm space between the
	sides and lateral furnishings
	or walls.
	or walls.
This is to ensure proper air circulation.

Ventilation

When the dryer is in use, there has to be adequate ventilation. Make sure you put your dryer in an environment that is not damp and has proper air circulation throughout. Airflow around the dryer is essential to condense the water produced during the washing, the dryer will not operate efficiently in an enclosed space or cupboard.

!If using the dryer in a small or cold room some condensation could be experienced.

!We do not recommend that the dryer is installed in a cupboard but the dryer must never be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the dryer door.

Water drain

If your dryer is installed next to a drain the water can be plumbed into this drain. This does away with the need to empty the water container. If the dryer is stacked onto or installed next to a washing machine it can share the same drain. The height of the drain must be less than 3' (1m) from the bottom of the dryer.

Note: If you have washed laundry in a washing machine with a spin speed below 1100 rpm and you are drying loads of 8 kg or more (also for energy label tests to EU Regulation 392) you will need to plumb the dryer into a drain, or the water container may fill before the clothes are dry. Follow the instructions below :

Remove hose from position shown (see diagram).

Remove hose from

here...

Fit a suitable length of hose to the
new location shown (see diagram).		...fit new hose here.
new location shown (see diagram).

!Make sure that the hose is not squashed or kinked when the dryer is in its final location.

Electrical connections

Make sure of the following before you insert the plug into the the electrical socket:

●Ensure your hands are dry.

●The socket must be grounded.

●The socket must be able to sustain the machines maximum power, which is indicated on the rating label (see Dryer Description).

●Power voltage must be within the values indicated on the rating label (see Dryer Description).

●The socket must be compatible with the dryers plug. Should this not be the case, replace the plug or the socket.

!Do not use extension cords.

!The dryer must not be installed outdoors, even if the space is sheltered. It can be very dangerous if it is exposed to rain or storms.

!Once installed, the dryers electrical wire and plug must be within easy reach.

!The power cord must not be bent or squashed.

!The power cord supplied is fitted with a BS1363 plug and a 13 amp BS1362 fuse. If you need to replace the fuse, use only those rated at 13 amp (13A) and ASTA approved to BS1362.

Moulded plug

!The plug must not be used without the fuse cover in place. If a replacement fuse holder/cover is required, it must be of the same colour coding or wording as shown on the base of the plug.

Replacements are available from authorised dealers.

Changing the plug

The wires in the power cord are coloured in accordance with the following:

Green and Yellow (Earth) wire to terminal marked ‘E’, symbol , or coloured green and

yellow. 13A ASTA approved fuse to BS1362.

Blue (Neutral) wire to
terminal marked ‘N’ or		Brown (Live) wire to
coloured black.		terminal marked ‘L’ or
		coloured red.
Cord clamp
Cord clamp

!If the plug being replaced is a non-rewirable type, then the cut-off plug must be disposed of safely. DO NOT leave it where it can be inserted into a socket and create a shock hazard.

!The power supply cord should be checked periodically and replaced by a cord specially prepared for this dryer and fitted only by authorised technicians (see Service).

New or longer power cords are supplied at an extra charge by authorised dealers.

!The manufacturer denies any responsibility should any of these rules not be followed.

!If in doubt about any of the above consult a qualified electrician.

Before you start using your dryer

Once you have installed your dryer and before you use it, clean the inside of the drum to remove any dust that could have accumulated during transport.

Tumble Dryer, TCUD 97B specifications

The Hotpoint TCUD 97B is a modern and efficient tumble dryer designed to meet the demands of contemporary households. This model combines convenience with cutting-edge technology, making it an excellent choice for anyone looking to enhance their laundry routine. With its robust build quality and innovative features, the TCUD 97B stands out as a reliable appliance.

One of the main characteristics of the Hotpoint TCUD 97B is its impressive capacity. With a generous load capacity of 9 kg, it can accommodate large loads of laundry, making it ideal for families or those who frequently wash big items like bed linens and towels. The dryer also boasts an energy efficiency rating of B, which helps reduce energy consumption while still providing powerful drying performance.

The TCUD 97B incorporates advanced sensor drying technology. This feature automatically detects the moisture level in clothes, adjusting the drying time accordingly. This not only ensures that clothes are dried to perfection but also prevents over-drying, which can damage fabrics and waste energy. Users can select from various drying programs tailored to different fabric types, including cotton, synthetic, and delicate items, ensuring optimal care for each load.

In addition to its efficient drying capabilities, the Hotpoint TCUD 97B is designed with user convenience in mind. Its easy-to-use digital display and intuitive controls make it simple for anyone to operate. The appliance features a reversible door, allowing flexibility in installation, whether in a tight space or a more open area.

Another noteworthy aspect of the TCUD 97B is its anti-allergy program. This function has been designed to eliminate allergens such as dust mites and pollen, making it a great option for households with allergy sufferers. This is particularly beneficial for maintaining a clean and healthy living environment.

The Hotpoint TCUD 97B is equipped with a large condensate container, which can be easily removed for emptying. The dryer also features a filter that is straightforward to clean, ensuring that the appliance remains efficient and reliable over time.

In summary, the Hotpoint TCUD 97B tumble dryer combines a large capacity with advanced drying technology, user-friendly design, and energy-efficient performance. It's an excellent investment for anyone looking to streamline their laundry process while ensuring clothes are treated with the utmost care. With its range of features, it provides reliable solutions for everyday laundry challenges.