Maintenance and Care

Switching off the electricity

!Unplug your dryer when not using it, when cleaning it and during all maintenance operations.

Clean the filter after each cycle

The filter is an important part of your dryer:

it accumulates lint and fluff that is formed while drying. When finished drying, clean the filter by rinsing it under running water or with your vacuum cleaner. Should the filter become clogged up, the airflow inside the dryer will be seriously compromised: drying times lengthen and you will consume more energy. It may also damage your dryer.

The filter is found in front of the dryer trim (see diagram). Removing the filter:

1.Pull the plastic grip of the filter upwards (see diagram).

2.Open the filter and clean the lint from the inside.

3.Replace it correctly. Ensure the filter is fully located flush into the tumble dryer trim.

4.Remove any lint that has built up on the inside of the door and around the door seal.

!Do not use the dryer without replacing the filter.

Cleaning the drum

!Do not use abrasives, steel wool or stainless steel cleaning agents to clean the drum.

A coloured film may start to appear on the stainless steel drum, this may be caused by a combination of water and, or cleaning agents such as fabric conditioner from the wash. This coloured film will not affect the dryer performance.

Cleaning the condenser unit

Periodically (every month) remove the condenser unit and clean any build up of fluff from between the plates by rinsing it under the tap with cold water.

This should be done with cold water from the rear of the condenser.

Removing the condenser:

1.Unplug the dryer and open the door.

2.Pull open the condenser cover (see diagram). Release the three catches by turning 90˚ counter- clockwise then pull on the grip and remove from the dryer.

3.Clean the surface of the seals and replace, making sure that the catches have been secured.

Check the drum after each cycle	Cleaning the dryer

Turn the drum manually in order to remove small items (handkerchiefs) that could have been left behind.

Empty the water container after each cycle

Pull the container out of the dryer and remove either the small or large cap and empty it into a sink or other suitable drain. Refit the cap and replace the container securely.

!Always check and empty the container before you start a new drying programme.

●External parts in metal or plastic and rubber parts can be cleaned with a damp cloth.

●Periodically (every 6 months) vacuum the front air intake grille, to remove any build up of fluff, lint or dust. Also to remove accumulation of fluff from the front of the condenser and filter areas, clean occasionally with a vacuum cleaner.

!Do not use solvents or abrasives.

!Your dryer uses special bearing components which do not need lubrication.

!Have your dryer checked regularly by authorised technicians to ensure electrical and mechanical safety (see Service).

Water container

Tap

Rear

Filter

Front

Condenser unit

Air intake

Condenser cover

Catches

TCEl 87B Experience specifications

The Hotpoint TCEl 87B is a versatile and efficient tumble dryer designed to meet the needs of modern households. With its sleek design and advanced technology, this appliance stands out in terms of performance and user-friendly features.

One of the main characteristics of the TCEl 87B is its capacity. With an 8 kg drum, it is ideally suited for families, allowing for larger loads of laundry to be dried at once. This not only saves time but also energy, making it a practical choice for busy households. The appliance is designed to handle various fabric types, ensuring that clothes come out fresh, soft, and well-maintained every time.

The Hotpoint TCEl 87B features advanced sensor drying technology, which is one of its most notable attributes. This technology uses moisture sensors to automatically detect the drying levels of clothes. As a result, it adjusts the drying time accordingly, preventing over-drying and helping to preserve the quality of fabrics. Users can select from various drying programs tailored to different materials, including delicate items, jeans, and sportswear, providing flexibility to accommodate various laundry types.

In addition to its drying programs, the TCEl 87B is designed with energy efficiency in mind. It boasts a B energy rating, indicating that it operates with reduced energy consumption compared to traditional dryers. This efficiency not only contributes to lower utility bills but is also a step towards a more sustainable lifestyle, making it an environmentally friendly option for consumers.

Another significant feature of this model is its anti-tangle technology. This innovative feature minimizes the tangling of clothes during the drying cycle, ensuring that laundry comes out less wrinkled. As a result, less time is needed for ironing, further enhancing user convenience.

The appliance also includes a reverse action drum, which alternates the direction of the drum's rotation. This helps to further prevent tangling and enhances the drying process by allowing air to circulate more freely around the fabrics.

Overall, the Hotpoint TCEl 87B combines practicality, efficiency, and advanced technology to offer a reliable drying solution for contemporary homes. With its thoughtful features and user-friendly design, it enhances the everyday laundry experience and meets the demands of modern living.