Start and Programmes

Choosing a programme

1.Plug the dryer into the electrical socket.

2.Sort your laundry according to fabric type (see Laundry).

3.Open the door make sure the filter is clean and in place and the water container is empty and in place (see Maintenance).

4.Load the machine and make sure items are not in the way of the door seal. Close the door.

5.Choose the drying time by checking the

Drying Guide table for the type of fabric you are drying (see Laundry).

-Set the temperature with the HEAT button.

-Select a drying time by rotating the TIMER knob clockwise*.

6.Press the START button to begin.

During the drying programme, you can check on your laundry and take out items that are dry while others continue drying. When you close the door again, press the START button in order to resume drying.

7.About 10 minutes before the programme is completed, it enters the final COOL TUMBLE phase (fabrics are cooled), which should always be allowed to complete.

8.Open the door, take the laundry out, clean the filter and replace it. Empty the water container and replace it (see Maintenance).

9.Unplug the dryer.

Note: The COOL TUMBLE programme can be used to refresh fibres of clothing.

- Set the TIMER with the cool tumble symbol inline with the indicator at Step 5 above* if you need this feature.