Description, Filling the water tank | Groupe SEB USA

Description

1.Steam control button

2.Iron temperature adjustment button

3.Iron thermostat light

4.Easycord system (depending on model)

5.Iron rest

6.Illuminated on / off switch

7.Power cord storage space

8.Power cord

9.Lock-System hoop (depending on model)

10.Water tank filler cover

11.Water tank

12. Steam generator boiler (in the base	GB
unit)

13.Iron-base steam cord

14.Slide storage place for the steam cord

15.a - Boiler rinse cap cover b - Boiler rinse cap

16.Control panel

a - Restart button

b - “Water tank empty” light c - “Steam ready” light

d - “Boiler rinse” light

e - Steam output control dial

Lockingsystemforretainingtheirononthebase-Lock-system

(dependingonmodel)

Your steam generator is equipped with a retaining clip which locks the iron on its casing for easier transport and storage – fig.1:

•Locking – fig.2

•Unlocking – fig.3

To carry your steam generator by the iron handle:

-place the iron on the iron rest of the generator and raise the retaining hoop over the iron until it locks into place (audible click) – fig.2

-grasp the handle of the iron to carry your steam generator – fig.1

Preparation

Due to the powerful steam output, a mesh type ironing board must be used to allow any excess steam to escape and to avoid steam venting sideways.

What water may be used ?

•Your iron has been designed to operate using untreated tap water.

•Heat concentrates the elements contained in water during evaporation. The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

If your water is very hard (check with your local water authority) it is possible to mix untreated tap water with store- bought distilled or demineralised water in the following proportions :

50% untreated tap water,

50% distilled or demineralised water.

Filling the water tank

•Place your steam generator on a stable, horizontal heat-resistant surface.

•Ensure that your steam generator is unplugged and that the soleplate and the iron rest have cooled down.

•Open the water tank filler cover– fig.4.

•Pour in untreated tap water up to the max mark – fig.5.

•Close the water tank filler cover.

Using the Easycord system (according to model)

• Your iron is equipped with an extension cord system to prevent the cord from
dragging over the laundry and creasing it again when ironing.
• Take the steam cord out of its housing and unwind it completely.
• Remove the tie to release the cord outlet.
• Press the Eject button – fig.6 and the Easycord system extends automatically.
• When the cord outlet tips, the Easycord system extends automatically without	5
you having to press the Eject button.	5

GV7120, GV7150 specifications

Groupe SEB is a renowned name in the small appliance industry, particularly recognized for its innovative cooking and home care products. Among its popular offerings are the T-FAL GV7150 and GV7120 steam generators, which exemplify the company’s commitment to quality and performance in ironing technology.

The T-FAL GV7150 and GV7120 steam generators feature powerful steam output systems designed for superior wrinkle removal and fabric care. The burst of steam capability ensures that even the toughest creases can be eliminated with ease, making these models ideal for both casual and serious users. With continuous steam output, they provide efficient performance, significantly reducing the time spent on ironing.

One of the main technologies employed in both models is the high-pressure steam system. This system allows for deep penetration into the fabric, which enhances the overall efficiency of the ironing process. The GV7150 delivers a continuous steam output of up to 120 g/min, while the GV7120 offers a slightly lower, yet impressive output. This makes both models adept at handling a variety of materials, from delicate fabrics to sturdy garments.

Another notable feature is the large removable water tank, which allows for easy refills and optimal ironing sessions without constant interruptions. The GV7150 has a water tank capacity of 1.6 liters, enabling longer ironing periods before needing to refill, while the GV7120, with its slightly smaller tank, also supports extended use. This aspect proves especially beneficial for larger household tasks, providing convenience and efficiency.

Safety features are paramount, and both models are equipped with an automatic shut-off function. This feature activates when the steam generator is left unattended, providing peace of mind for users and minimizing the risk of accidents.

Furthermore, the T-FAL GV7150 and GV7120 come with a unique Anti-Calc system that helps prevent limescale build-up. This prolongs the life of the machine and maintains optimal steam output. Their lightweight design enhances maneuverability, making it easier to navigate around fabrics while ironing.

In conclusion, the T-FAL GV7150 and GV7120 steam generators by Groupe SEB USA stand out for their powerful steam output, innovative technologies, and user-friendly features, all designed to simplify the ironing process and deliver outstanding results. Both models perfectly cater to the needs of various users, promising not only efficiency but also quality fabric care.