Technics SA-GX 19O manual Connections, Listening, Recording, Using Remote Control

Dear Customer

Thank you for purchasing this Technics product. For optimum performance and safety, please read these instructions carefully.

Table				of	con		tents
Before		use
Precautions				........................................				3
Accessories				........................................				4
Front panel				controls				5
Connections
Equipment			connections				..........................	6
Antenna		connections						7
Speaker		connections						9
Listening
Basic operations								10
To adjust		the	tone		quality			11
To adjust		the	sound		balance		...........................	11
To mute	the sound				level			11
When listening				through		headphones		11
Listening		to		radio		broadcasts		12
Direct access				tuning				12
Sequential		tuning						13
Preset tuning			.........................................					14
Recording
Making	a recording					...............................		16
Tape recording on the tape deck or digital compact
cassette	deck			(DCC)				16
VCR (VCR 1) recording						from	an audio source	16
Using		the		remote			control
Remote		control			operation			17
When		there seems					to be a
problem
Product		service			....................................			22
Troubleshooting					guide		...........................	23

Reference

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and retain them for future reference.

MODEL NUMBER ........ S..A.-G.X.I.9.0......................

SERIAL NUMBER .......................................

CAUTION:

This phrase is applied only for U.S.A.:

Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device.

WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.	i
CAUTION:	I
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.

A CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE SCREWS.

NO USER-SERVICEABLE

PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

	triangle	is	intended	to	alert the		user	to the
	presence		of important		operating		and	main-
,_The	tenance	(servicing)		instructions		in	the literature
	exclamation			point	within	an equilateral
	accompanying		the	appliance.

Technical specifications Back cover