Electrolux LAVAMAT 50720 manual Carrying out an Emergency Emptying

Page 31

Operating Instructions

Carrying out an Emergency Emptying

If the washing machine no longer pumps out the water an emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out if danger of freezing occurs.

Furthermore, the inlet hose must be disconnected from the tap, drained and laid on the floor.

1 Warning! Switch the washing machine off and pull the mains plug prior to emergency draining.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before emergency emp- tying!

0 1. Have a flat container on hand to catch the water running out.

2.Pull down the flap in the left corner of the base strip (1) and remove it (2).

3.Remove the emergency emptying hose

from its holder.

4. Pull the emergency emptying hose out a little.

5.Place the container under the hose.

6. Undo and remove the plug in the end of the emergency emptying hose by turning it anti-clockwise (1) and pull it out (2).

The wash-water runs out. Depending upon the amount of water, it may be necessary to empty the container several times. Temporarily close the emergency emptying hose with the plug.

31

Image 31
Contents Lavamat Dear Customer Contents Contents Installation and Connection Instructions Prior to Initial Start-up Safety InstructionsIntended Use General Safety Child SafetyEnvironmental Tips DisposalFront View Description of the ApplianceDetergent Dispenser Drawer Program Selector Control panelDelicates ON/OFF Button Temperature SelectorConsumption Data and Time Required Before Using for the First TimeSorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols Which Detergent? Detergents and ConditionersFabric Conditioners Which form?How much Detergent and Fabric Softener? Using a Water Softening AgentBrief Instructions Performing a Washing CycleAdding Detergent/Conditioner Loading the WashingSetting the Washing Program Changing the Spin Speed or Selecting Rinse Hold Starting the Washing ProgramDuring the Washing Program Wash Complete/Removing the Washing Washing Program TablesSeparate Gentle Rinsing/Starching/Conditioning Separate RinsingSeparate Spinning Washing with Soaking Washing with Pre WashWashing Machine Drum Maintenance and CleaningDoor What to do when… Trouble ShootingMalfunction Possible Cause Remedy Threaded fitting on If the Washing Results are not Satisfactory Carrying out an Emergency Emptying Cleaning the Drain Pump 0870 5 929 Service & Spare PartsGuarantee Conditions France Senlis Installation Safety Precautions Installation and Connection InstructionsFront and Side Views Appliance DimensionsRear View Appliance Transit Appliance InstallationRemoving Transit Packaging Levelling the Appliance Installation-Site PreparationElectrical Connection Permanent Connection Water ConnectionInlet Hose Connection Water PressureHot and Cold Water Connection Water Drainage AEG Service Force Technical DataIndex